On Fri, 06 Feb 2009 14:11:46 +0100, Roel Kluin wrote:
> Let's first adress the other issues at hand.
> This patch should be applied on top of my previous cleanup patch

Agreed.

> 
> --------------------------->8---------------------8<---------------------------
> With a postfix decrement these timeouts reach -1 rather than 0, but after the
> loop it is tested whether they have become 0.
> 
> As pointed out by Jean Delvare, the msg_num should be tested before the 
> timeout.
> With the current order, you could exit with a timeout error while all the
> messages were successfully transferred.
> 
> Signed-off-by: Roel Kluin <[email protected]>
> ---
> diff --git a/drivers/i2c/algos/i2c-algo-pcf.c 
> b/drivers/i2c/algos/i2c-algo-pcf.c
> index ce916d7..2862f11 100644
> --- a/drivers/i2c/algos/i2c-algo-pcf.c
> +++ b/drivers/i2c/algos/i2c-algo-pcf.c
> @@ -115,15 +115,17 @@ static int wait_for_bb(struct i2c_algo_pcf_data *adap)
>  
>       status = get_pcf(adap, 1);
>  
> -     while (timeout-- && !(status & I2C_PCF_BB)) {
> +     while (!(status & I2C_PCF_BB) && --timeout) {
>               udelay(100); /* wait for 100 us */
>               status = get_pcf(adap, 1);
>       }
>  
> -     if (timeout <= 0)
> +     if (timeout == 0) {
>               printk(KERN_ERR "Timeout waiting for Bus Busy\n");
> +             return -ETIMEDOUT;
> +     }
>  
> -     return timeout <= 0;
> +     return 0;
>  }
>  
>  static int wait_for_pin(struct i2c_algo_pcf_data *adap, int *status)
> @@ -133,7 +135,7 @@ static int wait_for_pin(struct i2c_algo_pcf_data *adap, 
> int *status)
>  
>       *status = get_pcf(adap, 1);
>  
> -     while (timeout-- && (*status & I2C_PCF_PIN)) {
> +     while ((*status & I2C_PCF_PIN) && --timeout) {
>               adap->waitforpin(adap->data);
>               *status = get_pcf(adap, 1);
>       }
> @@ -142,10 +144,10 @@ static int wait_for_pin(struct i2c_algo_pcf_data *adap, 
> int *status)
>               return -EINTR;
>       }
>  
> -     if (timeout <= 0)
> -             return -1;
> -     else
> -             return 0;
> +     if (timeout == 0)
> +             return -ETIMEDOUT;
> +
> +     return 0;
>  }
>  
>  /*

Applied, thanks. It would be great if Eric (or anyone with a
PCF8584-based adapter) could test the two patches, just to make sure we
didn't accidentally break anything:

ftp://ftp.kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-i2c/i2c-algo-pcf-01-style-cleanups.patch
ftp://ftp.kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-i2c/i2c-algo-pcf-02-handle-timeout-correctly.patch

-- 
Jean Delvare
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to