Hi,
On Mon, Feb 23, 2009 at 09:38:45AM -0500, Jon Smirl wrote:
> On Mon, Feb 23, 2009 at 6:00 AM, Daniel Mack <[email protected]> wrote:
> > what's the suggested way of implementing an i2c drver which does not
> > have any other interfaces to the outside world than just the i2c device
> > it is communicating with? More specifically, I implemented a driver for a
> > Maxim clock generator and would like to use a proprietary interface with
> > it from a alsa-soc module. I just can't find a sane way to access the
> > driver's instance from there. It does exist somewhere in the linux
> > device tree, but is there a simple function that iterates over it and
> > returns it to me by name? Reading include/linux/device.h didn't point me
> > to anything that could fit.
>
> The max9485? Which codec are you using it with? I tried submitting the
> attached driver for the chip but Jean said it was too simple of a
> driver.
Yes, it's the same one.
> I use it like this:
>
> static int dspeak01_fabric_hw_params(struct snd_pcm_substream
> *substream, struct snd_pcm_hw_params *params)
> {
> uint rate, select;
> int ret;
> struct snd_soc_pcm_runtime *rtd = substream->private_data;
> struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
>
> printk("dspeak01_fabric_hw_params\n");
>
> switch (params_rate(params)) {
> case 11025:
> case 22050:
> case 44100:
> case 88200:
> case 176400:
> rate = 22579200;
> select = MAX9485_225792;
> break;
> default:
> rate = 24576000;
> select = MAX9485_245760;
> break;
> }
> max9485_set(fabric.clock, select | MAX9485_CLK_OUT_2);
I still don't see where you got the pointer from you are using here, and
that's my whole question.
Your driver looks very much like the one I wrote, though ;)
Daniel
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
