Hi Ayman,
On Mon, 9 Mar 2009 15:52:56 +0100, Ayman KHAMOUMA wrote:
> I'm new on I2C device drivers programming and I'm facing a little problem, I
> can't find how to select my i2c-0 bus (I have 3 of them: i2c-0, i2c-1 and
> i2c-2) I'd like my probe function to probe only this bus and ignore the
> others.
> I guess I can find the solution with the i2c_address_data structure, but I
> don't really understand how to use it...
It would help if you would first tell us what kernel version you are
using, what device you are writing a driver for, and what
architecture / system type this is all working on.
> Do I have to use the ignore_range array ?
ignore_range has gone away long ago. The last kernel that had it was
2.6.12.6, released in late August 2005. Are really you using such an
old kernel?
> Once filed, I have nothing to do ?
>
> The device I want to probe/send data to is located on bus i2c-0 and at the
> adresses 0x00 to 0x15
I seriously doubt this. Addresses 0x00, 0x01 and 0x02 are very special
for I2C, no device can use them. I suspect you are mixing register
addresses (the map of which is internal and specific to each device)
with device addresses on the bus.
> I guess I have to do:
> static unsigned short ignore_range[] = { 0x00, 0x16, 0xff, 0x01, 0x00, 0xff,
> 0x02, 0x00, 0xff, I2C_CLIENT_END };
>
> Am I right ?
No, this is seriously wrong. But I can't tell more without additional
information about what you are trying to achieve in the first place.
--
Jean Delvare
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
