Jean Delvare napisał(a): > Hi Krzysztof, > > On Mon, 23 Mar 2009 19:26:46 +0100, Krzysztof Helt wrote: > > From: Krzysztof Helt >[email protected]> > > > > Read DDC information from a connected monitor > > and use it to select initial mode (if the mode > > is not specified). > > Also, use the information to protect against > > modes outside the monitor specs. > > > > Signed-off-by: Krzysztof Helt >[email protected]> > > --- > > drivers/video/tdfxfb.c | 67 > +++++++++++++++++++++++++++++++++++++++++++++--- > > 1 files changed, 63 insertions(+), 4 deletions(-) > > Patch tested successfully. Without the patch: > > fb: 3Dfx Voodoo3 memory = 16384K > Console: switching to colour frame buffer device 80x30 > > With the patch: > > fb: 3Dfx Voodoo3 memory = 16384K > Console: switching to colour frame buffer device 128x48 > > Much better! :) This is on a Voodoo3. If you want me to test something > in particular, just let me know. >
I have tested it on Voodoo3 3000 AGP and Voodoo5 AGP with LCD panel and CRT monitor. It is reallycool on CRT monitor - it returns a resolution with high refresh rate and quite useful (on my 15" CRT it is 800x600 at 85Hz). If you can test the BT869 driver for a Voodoo3 card (mentioned in the i2c-voodoo3 doc) it would be great. Thank you for testing, Krzysztof ---------------------------------------------------------------------- Opony letnie do 30% taniej i z darmową dostawą! Sprawdź >>> http://link.interia.pl/f20b7 -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
