Guennadi Liakhovetski wrote:
On Mon, 30 Mar 2009, Mark Brown wrote:
On Sat, Mar 28, 2009 at 10:36:50PM +0100, Guennadi Liakhovetski wrote:
different drivers, and I really hoped its new version will work
out-of-the-box in my setup (pcm037 with a mt9t031 camera). Unfortunately,
it didn't. I've spent more than a full working day trying to get it to
work, but I didn't succeed so far. It works with the on-board rtc, but it
doesn't work with the camera, connected over a flex cable.
What problems are you experiencing? I've been using versions of Darius'
driver for a while now with no problems on my system.
I couldn't read camera ID register during probing. As I mentioned, the
camera is connected over a, hm, limited-quality self-soldered (by
professionals) cable, and I have to reduce bus clock to 20kHz. Has anyone
tested this driver with lower frequencies?
yes, I tested this with low frequencies (tens of kHz) and high freq. (400kHz).
Thanks
Guennadi
---
Guennadi Liakhovetski, Ph.D.
Freelance Open-Source Software Developer
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
