The legacy i2c_probe() function has no users left, get rid of it.

Signed-off-by: Jean Delvare <kh...@linux-fr.org>
Cc: David Brownell <dbrown...@users.sourceforge.net>
---
 drivers/i2c/i2c-core.c |  137 ------------------------------------------------
 include/linux/i2c.h    |    8 --
 2 files changed, 145 deletions(-)

--- linux-2.6.30-rc4.orig/drivers/i2c/i2c-core.c        2009-04-30 
18:05:25.000000000 +0200
+++ linux-2.6.30-rc4/drivers/i2c/i2c-core.c     2009-04-30 18:05:54.000000000 
+0200
@@ -1042,144 +1042,7 @@ EXPORT_SYMBOL(i2c_master_recv);
  * Will not work for 10-bit addresses!
  * ----------------------------------------------------
  */
-static int i2c_probe_address(struct i2c_adapter *adapter, int addr, int kind,
-                            int (*found_proc) (struct i2c_adapter *, int, int))
-{
-       int err;
-
-       /* Make sure the address is valid */
-       if (addr < 0x03 || addr > 0x77) {
-               dev_warn(&adapter->dev, "Invalid probe address 0x%02x\n",
-                        addr);
-               return -EINVAL;
-       }
-
-       /* Skip if already in use */
-       if (i2c_check_addr(adapter, addr))
-               return 0;
-
-       /* Make sure there is something at this address, unless forced */
-       if (kind < 0) {
-               if (i2c_smbus_xfer(adapter, addr, 0, 0, 0,
-                                  I2C_SMBUS_QUICK, NULL) < 0)
-                       return 0;
-
-               /* prevent 24RF08 corruption */
-               if ((addr & ~0x0f) == 0x50)
-                       i2c_smbus_xfer(adapter, addr, 0, 0, 0,
-                                      I2C_SMBUS_QUICK, NULL);
-       }
-
-       /* Finally call the custom detection function */
-       err = found_proc(adapter, addr, kind);
-       /* -ENODEV can be returned if there is a chip at the given address
-          but it isn't supported by this chip driver. We catch it here as
-          this isn't an error. */
-       if (err == -ENODEV)
-               err = 0;
-
-       if (err)
-               dev_warn(&adapter->dev, "Client creation failed at 0x%x (%d)\n",
-                        addr, err);
-       return err;
-}
-
-int i2c_probe(struct i2c_adapter *adapter,
-             const struct i2c_client_address_data *address_data,
-             int (*found_proc) (struct i2c_adapter *, int, int))
-{
-       int i, err;
-       int adap_id = i2c_adapter_id(adapter);
-
-       /* Force entries are done first, and are not affected by ignore
-          entries */
-       if (address_data->forces) {
-               const unsigned short * const *forces = address_data->forces;
-               int kind;
-
-               for (kind = 0; forces[kind]; kind++) {
-                       for (i = 0; forces[kind][i] != I2C_CLIENT_END;
-                            i += 2) {
-                               if (forces[kind][i] == adap_id
-                                || forces[kind][i] == ANY_I2C_BUS) {
-                                       dev_dbg(&adapter->dev, "found force "
-                                               "parameter for adapter %d, "
-                                               "addr 0x%02x, kind %d\n",
-                                               adap_id, forces[kind][i + 1],
-                                               kind);
-                                       err = i2c_probe_address(adapter,
-                                               forces[kind][i + 1],
-                                               kind, found_proc);
-                                       if (err)
-                                               return err;
-                               }
-                       }
-               }
-       }
-
-       /* Stop here if we can't use SMBUS_QUICK */
-       if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_QUICK)) {
-               if (address_data->probe[0] == I2C_CLIENT_END
-                && address_data->normal_i2c[0] == I2C_CLIENT_END)
-                       return 0;
-
-               dev_dbg(&adapter->dev, "SMBus Quick command not supported, "
-                       "can't probe for chips\n");
-               return -EOPNOTSUPP;
-       }
-
-       /* Probe entries are done second, and are not affected by ignore
-          entries either */
-       for (i = 0; address_data->probe[i] != I2C_CLIENT_END; i += 2) {
-               if (address_data->probe[i] == adap_id
-                || address_data->probe[i] == ANY_I2C_BUS) {
-                       dev_dbg(&adapter->dev, "found probe parameter for "
-                               "adapter %d, addr 0x%02x\n", adap_id,
-                               address_data->probe[i + 1]);
-                       err = i2c_probe_address(adapter,
-                                               address_data->probe[i + 1],
-                                               -1, found_proc);
-                       if (err)
-                               return err;
-               }
-       }
-
-       /* Normal entries are done last, unless shadowed by an ignore entry */
-       for (i = 0; address_data->normal_i2c[i] != I2C_CLIENT_END; i += 1) {
-               int j, ignore;
-
-               ignore = 0;
-               for (j = 0; address_data->ignore[j] != I2C_CLIENT_END;
-                    j += 2) {
-                       if ((address_data->ignore[j] == adap_id ||
-                            address_data->ignore[j] == ANY_I2C_BUS)
-                        && address_data->ignore[j + 1]
-                           == address_data->normal_i2c[i]) {
-                               dev_dbg(&adapter->dev, "found ignore "
-                                       "parameter for adapter %d, "
-                                       "addr 0x%02x\n", adap_id,
-                                       address_data->ignore[j + 1]);
-                               ignore = 1;
-                               break;
-                       }
-               }
-               if (ignore)
-                       continue;
-
-               dev_dbg(&adapter->dev, "found normal entry for adapter %d, "
-                       "addr 0x%02x\n", adap_id,
-                       address_data->normal_i2c[i]);
-               err = i2c_probe_address(adapter, address_data->normal_i2c[i],
-                                       -1, found_proc);
-               if (err)
-                       return err;
-       }
-
-       return 0;
-}
-EXPORT_SYMBOL(i2c_probe);
 
-/* Separate detection function for new-style drivers */
 static int i2c_detect_address(struct i2c_client *temp_client, int kind,
                              struct i2c_driver *driver)
 {
--- linux-2.6.30-rc4.orig/include/linux/i2c.h   2009-04-30 18:04:20.000000000 
+0200
+++ linux-2.6.30-rc4/include/linux/i2c.h        2009-04-30 18:05:36.000000000 
+0200
@@ -419,14 +419,6 @@ extern void i2c_release_client(struct i2
 extern void i2c_clients_command(struct i2c_adapter *adap,
                                unsigned int cmd, void *arg);
 
-/* Detect function. It iterates over all possible addresses itself.
- * It will only call found_proc if some client is connected at the
- * specific address (unless a 'force' matched);
- */
-extern int i2c_probe(struct i2c_adapter *adapter,
-               const struct i2c_client_address_data *address_data,
-               int (*found_proc) (struct i2c_adapter *, int, int));
-
 extern struct i2c_adapter *i2c_get_adapter(int id);
 extern void i2c_put_adapter(struct i2c_adapter *adap);
 

-- 
Jean Delvare
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to