(cc linux-i2c) On Tue, Jun 23, 2009 at 08:51:16AM +0200, Klemen Omejc wrote: > I using trizepsIV module with PXA27x and ConXs board, kernel 2.6.20. > > I would like to have access to driver for RTC PCF8593 (PCF8583) on I2C bus > from my FLTK application. What is the easy way to do that.
You need to have an i2c_board_info struct to instanciate the driver from your board support code. Pass in the driver's names and the addresses, then call i2c_register_board_info(). You can also have a look at how others do that in arch/arm/mach-pxa/*. However, I'm not quite sure whether that mechanism is also valid for kernel 2.6.20. If it isn't, you should consider updating to something more recent. > Probably than I could also connect to EEPROM and temperature sensors on > the same way. Yes, that works for all devices connected to I2C. Daniel -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
