alfred steele wrote: >> ~$ insmod sht15.ko >> regulator: Unable to get requested regulator: vcc >> sht15 sht15: Command not acknowledged > Please ignore the 1st line as i have bypassed the regulator framework. > Another quick question: The datasheet recommends 3.3V but the > voltage measured on my lines are ~2.8V. That could be another spoiler. It'll probably be fine.
I suggest sticking a scope on the signal lines and confirming things that look about right are going down them. Jonathan -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
