Adding TPS65023 and TPS6507x regulator driver support in
drivers/regulator/Makefile and drivers/regulator/Kconfig
---
drivers/regulator/Kconfig | 16 ++++++++++++++++
drivers/regulator/Makefile | 3 +++
2 files changed, 19 insertions(+), 0 deletions(-)
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index f431779..8568f3e 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -117,4 +117,20 @@ config REGULATOR_LP3971
Say Y here to support the voltage regulators and convertors
on National Semiconductors LP3971 PMIC
+config REGULATOR_TPS65023
+ tristate "TI TPS65023 Power regulators"
+ depends on I2C
+ help
+ This driver supports TPS65023 voltage regulator chips. TPS65023
provides
+ three step-down converters and two general-purpose LDO voltage
regulators.
+ It supports TI's software based Class-2 SmartReflex implementation.
+
+config REGULATOR_TPS6507X
+ tristate "TI TPS6507X Power regulators"
+ depends on I2C
+ help
+ This driver supports TPS6507X voltage regulator chips. TPS6507X
provides
+ three step-down converters and two general-purpose LDO voltage
regulators.
+ It supports TI's software based Class-2 SmartReflex implementation.
+
endif
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 4d762c4..5263913 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -17,4 +17,7 @@ obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o
obj-$(CONFIG_REGULATOR_DA903X) += da903x.o
obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o
+obj-$(CONFIG_REGULATOR_TPS65023) += tps65023-regulator.o
+obj-$(CONFIG_REGULATOR_TPS6507X) += tps6507x-regulator.o
+
ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG
--
1.6.2.4
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
