-----Original Message-----
From: [email protected] [mailto:[email protected]]
On Behalf Of Shinya Kuribayashi
Sent: Monday, October 12, 2009 9:54 PM
To: [email protected]; [email protected]
Cc: [email protected]; [email protected];
[email protected]
Subject: [PATCH 14/16] i2c-designware: Deferred FIFO-data-counting variables
initialization
As the driver and hardware always process the given data in parallel, it would
be better to initialize those {tx,rx}_limit or rx_valid variables just prior to
be used.
This will help to send/receive data as much as possible.
Signed-off-by: Shinya Kuribayashi <[email protected]>
---
drivers/i2c/busses/i2c-designware.c | 10 +++++++---
1 files changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/i2c/busses/i2c-designware.c
b/drivers/i2c/busses/i2c-designware.c
index b3152c2..f7ea032 100644
--- a/drivers/i2c/busses/i2c-designware.c
+++ b/drivers/i2c/busses/i2c-designware.c
@@ -359,8 +359,7 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev) {
struct i2c_msg *msgs = dev->msgs;
u32 intr_mask;
- int tx_limit = dev->tx_fifo_depth - readl(dev->base + DW_IC_TXFLR);
- int rx_limit = dev->rx_fifo_depth - readl(dev->base + DW_IC_RXFLR);
+ int tx_limit, rx_limit;
u32 addr = msgs[dev->msg_write_idx].addr;
u32 buf_len = dev->tx_buf_len;
u8 *buf = dev->tx_buf;;
@@ -386,6 +385,9 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev)
buf_len = msgs[dev->msg_write_idx].len;
}
+ tx_limit = dev->tx_fifo_depth - readl(dev->base + DW_IC_TXFLR);
+ rx_limit = dev->rx_fifo_depth - readl(dev->base + DW_IC_RXFLR);
+
while (buf_len > 0 && tx_limit > 0 && rx_limit > 0) {
if (msgs[dev->msg_write_idx].flags & I2C_M_RD) {
writel(0x100, dev->base + DW_IC_DATA_CMD); @@
-418,7 +420,7 @@ i2c_dw_read(struct dw_i2c_dev *dev) {
struct i2c_msg *msgs = dev->msgs;
u32 addr = msgs[dev->msg_read_idx].addr;
- int rx_valid = readl(dev->base + DW_IC_RXFLR);
+ int rx_valid;
for (; dev->msg_read_idx < dev->msgs_num; dev->msg_read_idx++) {
u32 len;
@@ -439,6 +441,8 @@ i2c_dw_read(struct dw_i2c_dev *dev)
buf = dev->rx_buf;
}
+ rx_valid = readl(dev->base + DW_IC_RXFLR);
+
for (; len > 0 && rx_valid > 0; len--, rx_valid--)
*buf++ = readl(dev->base + DW_IC_DATA_CMD);
--
1.6.5
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the
body of a message to [email protected] More majordomo info at
http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
