Add suspend and resume callbacks to DaVinci I2C driver. This has been tested on DA850/OMAP-L138 EVM. The SoC specific suspend-to-RAM support patch series [1] is needed to test this feature.
[1] http://linux.davincidsp.com/pipermail/davinci-linux-open-source/ 2009-November/016958.html Signed-off-by: Chaithrika U S <[email protected]> Signed-off-by: Kevin Hilman <[email protected]> --- drivers/i2c/busses/i2c-davinci.c | 36 ++++++++++++++++++++++++++++++++++++ 1 files changed, 36 insertions(+), 0 deletions(-) diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c index 81c1049..d2a4844 100644 --- a/drivers/i2c/busses/i2c-davinci.c +++ b/drivers/i2c/busses/i2c-davinci.c @@ -622,6 +622,41 @@ static int davinci_i2c_remove(struct platform_device *pdev) return 0; } +#ifdef CONFIG_PM +static int davinci_i2c_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct davinci_i2c_dev *i2c_dev = platform_get_drvdata(pdev); + + /* put I2C into reset */ + davinci_i2c_reset_ctrl(i2c_dev, 0); + clk_disable(i2c_dev->clk); + + return 0; +} + +static int davinci_i2c_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct davinci_i2c_dev *i2c_dev = platform_get_drvdata(pdev); + + clk_enable(i2c_dev->clk); + /* take I2C out of reset */ + davinci_i2c_reset_ctrl(i2c_dev, 1); + + return 0; +} + +static struct dev_pm_ops davinci_i2c_pm = { + .suspend = davinci_i2c_suspend, + .resume = davinci_i2c_resume, +}; + +#define davinci_i2c_pm_ops (&davinci_i2c_pm) +#else +#define davinci_i2c_pm_ops NULL +#endif + /* work with hotplug and coldplug */ MODULE_ALIAS("platform:i2c_davinci"); @@ -631,6 +666,7 @@ static struct platform_driver davinci_i2c_driver = { .driver = { .name = "i2c_davinci", .owner = THIS_MODULE, + .pm = davinci_i2c_pm_ops, }, }; -- 1.5.6 -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
