On Tue, Jan 26, 2010 at 03:41:28PM -0800, Kevin Hilman wrote:
> From: Dirk Behme <[email protected]>
>
> This fixes Oops at kernel startup while "scanning" for TLV320AIC23IDx
> addresses.
>
> Signed-off-by: Alexander Vasiliev <[email protected]>
> Signed-off-by: Brad Griffis <[email protected]>
> Signed-off-by: Dirk Behme <[email protected]>
> Acked-by: Kevin Hilman <[email protected]>
> ---
> drivers/i2c/busses/i2c-davinci.c | 29 +++++++++++++++++++++++++----
> 1 files changed, 25 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-davinci.c
> b/drivers/i2c/busses/i2c-davinci.c
> index c89687a..444a9f2 100644
> --- a/drivers/i2c/busses/i2c-davinci.c
> +++ b/drivers/i2c/busses/i2c-davinci.c
> @@ -112,6 +112,7 @@ struct davinci_i2c_dev {
> u8 *buf;
> size_t buf_len;
> int irq;
> + int stop;
> u8 terminate;
> struct i2c_adapter adapter;
> };
> @@ -249,9 +250,6 @@ i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct
> i2c_msg *msg, int stop)
> u16 w;
> int r;
>
> - if (msg->len == 0)
> - return -EINVAL;
> -
> if (!pdata)
> pdata = &davinci_i2c_platform_data_default;
> /* Introduce a delay, required for some boards (e.g Davinci EVM) */
> @@ -263,6 +261,7 @@ i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct
> i2c_msg *msg, int stop)
>
> dev->buf = msg->buf;
> dev->buf_len = msg->len;
> + dev->stop = stop;
>
> davinci_i2c_write_reg(dev, DAVINCI_I2C_CNT_REG, dev->buf_len);
>
> @@ -280,6 +279,10 @@ i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct
> i2c_msg *msg, int stop)
> flag |= DAVINCI_I2C_MDR_TRX;
> if (stop)
> flag |= DAVINCI_I2C_MDR_STP;
> + if (msg->len == 0) {
> + flag |= DAVINCI_I2C_MDR_RM;
> + flag &= ~DAVINCI_I2C_MDR_STP;
> + }
>
> /* Enable receive or transmit interrupts */
> w = davinci_i2c_read_reg(dev, DAVINCI_I2C_IMR_REG);
> @@ -290,6 +293,16 @@ i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct
> i2c_msg *msg, int stop)
> davinci_i2c_write_reg(dev, DAVINCI_I2C_IMR_REG, w);
>
> dev->terminate = 0;
> +
> + /* First byte should be set here, not after interrupt,
> + * because transmit-data-ready interrupt can come before
> + * NACK-interrupt during sending of previous message and
> + * ICDXR may have wrong data */
> + if ((!(msg->flags & I2C_M_RD)) && dev->buf_len) {
> + davinci_i2c_write_reg(dev, DAVINCI_I2C_DXR_REG, *dev->buf++);
> + dev->buf_len--;
> + }
> +
> /* write the data into mode register */
> davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, flag);
>
> @@ -371,7 +384,7 @@ i2c_davinci_xfer(struct i2c_adapter *adap, struct i2c_msg
> msgs[], int num)
>
> static u32 i2c_davinci_func(struct i2c_adapter *adap)
> {
> - return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK);
> + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
> }
>
> static void terminate_read(struct davinci_i2c_dev *dev)
> @@ -430,6 +443,14 @@ static irqreturn_t i2c_davinci_isr(int this_irq, void
> *dev_id)
> case DAVINCI_I2C_IVR_ARDY:
> davinci_i2c_write_reg(dev,
> DAVINCI_I2C_STR_REG, DAVINCI_I2C_STR_ARDY);
> + if (((dev->buf_len == 0) && (dev->stop != 0)) ||
technically you don't need () around simple tests...
> + (dev->cmd_err & DAVINCI_I2C_STR_NACK)) {
> + w = davinci_i2c_read_reg(dev,
> + DAVINCI_I2C_MDR_REG);
> + w |= DAVINCI_I2C_MDR_STP;
> + davinci_i2c_write_reg(dev,
> + DAVINCI_I2C_MDR_REG, w);
> + }
> complete(&dev->cmd_complete);
> break;
>
> --
> 1.6.6
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Ben ([email protected], http://www.fluff.org/)
'a smiley only costs 4 bytes'
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
