From: Kevin Wells <[email protected]>

Enable I2C peripheral clocking at the start of a transfer and
disable on transfer completion to reduce peripheral power use
when bus is not in use.

Signed-off-by: Kevin Wells <[email protected]>
---
 drivers/i2c/busses/i2c-pnx.c |   33 +++++++--------------------------
 1 files changed, 7 insertions(+), 26 deletions(-)

diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c
index 6bb6ff7..23bd556 100644
--- a/drivers/i2c/busses/i2c-pnx.c
+++ b/drivers/i2c/busses/i2c-pnx.c
@@ -448,6 +448,8 @@ i2c_pnx_xfer(struct i2c_adapter *adap, struct i2c_msg 
*msgs, int num)
                "%s(): entering: %d messages, stat = %04x.\n",
                __func__, num, ioread32(I2C_REG_STS(alg_data)));
 
+       clk_enable(alg_data->clk);
+
        bus_reset_if_active(alg_data);
 
        /* Process transactions in a loop. */
@@ -516,6 +518,8 @@ i2c_pnx_xfer(struct i2c_adapter *adap, struct i2c_msg 
*msgs, int num)
 
        bus_reset_if_active(alg_data);
 
+       clk_disable(alg_data->clk);
+
        /* Cleanup to be sure... */
        alg_data->mif.buf = NULL;
        alg_data->mif.len = 0;
@@ -539,29 +543,6 @@ static struct i2c_algorithm pnx_algorithm = {
        .functionality = i2c_pnx_func,
 };
 
-#ifdef CONFIG_PM
-static int i2c_pnx_controller_suspend(struct platform_device *pdev,
-                                     pm_message_t state)
-{
-       struct i2c_pnx_algo_data *alg_data = platform_get_drvdata(pdev);
-
-       /* FIXME: shouldn't this be clk_disable? */
-       clk_enable(alg_data->clk);
-
-       return 0;
-}
-
-static int i2c_pnx_controller_resume(struct platform_device *pdev)
-{
-       struct i2c_pnx_algo_data *alg_data = platform_get_drvdata(pdev);
-
-       return clk_enable(alg_data->clk);
-}
-#else
-#define i2c_pnx_controller_suspend     NULL
-#define i2c_pnx_controller_resume      NULL
-#endif
-
 static int __devinit i2c_pnx_probe(struct platform_device *pdev)
 {
        unsigned long tmp;
@@ -665,6 +646,9 @@ static int __devinit i2c_pnx_probe(struct platform_device 
*pdev)
        dev_dbg(&pdev->dev, "%s: Master at %#8x, irq %d.\n",
               alg_data->adapter.name, i2c_pnx->base, i2c_pnx->irq);
 
+       /* Disable clock until needed */
+       clk_disable(alg_data->clk);
+
        return 0;
 
 out_irq:
@@ -692,7 +676,6 @@ static int __devexit i2c_pnx_remove(struct platform_device 
*pdev)
 
        free_irq(i2c_pnx->irq, alg_data);
        i2c_del_adapter(&alg_data->adapter);
-       clk_disable(alg_data->clk);
        iounmap(alg_data->ioaddr);
        release_mem_region(i2c_pnx->base, I2C_PNX_REGION_SIZE);
        clk_put(alg_data->clk);
@@ -709,8 +692,6 @@ static struct platform_driver i2c_pnx_driver = {
        },
        .probe = i2c_pnx_probe,
        .remove = __devexit_p(i2c_pnx_remove),
-       .suspend = i2c_pnx_controller_suspend,
-       .resume = i2c_pnx_controller_resume,
 };
 
 static int __init i2c_adap_pnx_init(void)
-- 
1.6.6

--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to