This patch fixes all coding style issues found by checkpatch.pl.

Signed-off-by: Farid Hammane <[email protected]>
---
 drivers/i2c/algos/i2c-algo-pca.c |   74 ++++++++++++++++++++++---------------
 1 files changed, 44 insertions(+), 30 deletions(-)

diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c
index dcdaf8e..4cb9ece 100644
--- a/drivers/i2c/algos/i2c-algo-pca.c
+++ b/drivers/i2c/algos/i2c-algo-pca.c
@@ -37,15 +37,15 @@
 
 static int i2c_debug;
 
-#define pca_outw(adap, reg, val) adap->write_byte(adap->data, reg, val)
-#define pca_inw(adap, reg) adap->read_byte(adap->data, reg)
+#define pca_outw(adap, reg, val) (adap->write_byte(adap->data, reg, val))
+#define pca_inw(adap, reg) (adap->read_byte(adap->data, reg))
 
 #define pca_status(adap) pca_inw(adap, I2C_PCA_STA)
-#define pca_clock(adap) adap->i2c_clock
+#define pca_clock(adap) (adap->i2c_clock)
 #define pca_set_con(adap, val) pca_outw(adap, I2C_PCA_CON, val)
 #define pca_get_con(adap) pca_inw(adap, I2C_PCA_CON)
-#define pca_wait(adap) adap->wait_for_completion(adap->data)
-#define pca_reset(adap) adap->reset_chip(adap->data)
+#define pca_wait(adap) (adap->wait_for_completion(adap->data))
+#define pca_reset(adap) (adap->reset_chip(adap->data))
 
 static void pca9665_reset(void *pd)
 {
@@ -114,8 +114,8 @@ static int pca_address(struct i2c_algo_pca_data *adap,
        int sta = pca_get_con(adap);
        int addr;
 
-       addr = ( (0x7f & msg->addr) << 1 );
-       if (msg->flags & I2C_M_RD )
+       addr = ((0x7f & msg->addr) << 1);
+       if (msg->flags & I2C_M_RD)
                addr |= 1;
        DEB2("=== SLAVE ADDRESS %#04x+%c=%#04x\n",
             msg->addr, msg->flags & I2C_M_RD ? 'R' : 'W', addr);
@@ -170,7 +170,7 @@ static int pca_rx_ack(struct i2c_algo_pca_data *adap,
 
        sta &= ~(I2C_PCA_CON_STO|I2C_PCA_CON_STA|I2C_PCA_CON_SI|I2C_PCA_CON_AA);
 
-       if ( ack )
+       if (ack)
                sta |= I2C_PCA_CON_AA;
 
        pca_set_con(adap, sta);
@@ -178,12 +178,12 @@ static int pca_rx_ack(struct i2c_algo_pca_data *adap,
 }
 
 static int pca_xfer(struct i2c_adapter *i2c_adap,
-                    struct i2c_msg *msgs,
-                    int num)
+               struct i2c_msg *msgs,
+               int num)
 {
-        struct i2c_algo_pca_data *adap = i2c_adap->algo_data;
-        struct i2c_msg *msg = NULL;
-        int curmsg;
+       struct i2c_algo_pca_data *adap = i2c_adap->algo_data;
+       struct i2c_msg *msg = NULL;
+       int curmsg;
        int numbytes = 0;
        int state;
        int ret;
@@ -202,22 +202,25 @@ static int pca_xfer(struct i2c_adapter *i2c_adap,
 
        DEB1("{{{ XFER %d messages\n", num);
 
-       if (i2c_debug>=2) {
+       if (i2c_debug >= 2) {
                for (curmsg = 0; curmsg < num; curmsg++) {
                        int addr, i;
                        msg = &msgs[curmsg];
 
                        addr = (0x7f & msg->addr) ;
 
-                       if (msg->flags & I2C_M_RD )
+                       if (msg->flags & I2C_M_RD)
                                printk(KERN_INFO "    [%02d] RD %d bytes from 
%#02x [%#02x, ...]\n",
                                       curmsg, msg->len, addr, (addr<<1) | 1);
                        else {
                                printk(KERN_INFO "    [%02d] WR %d bytes to 
%#02x [%#02x%s",
                                       curmsg, msg->len, addr, addr<<1,
                                       msg->len == 0 ? "" : ", ");
-                               for(i=0; i < msg->len; i++)
-                                       printk("%#04x%s", msg->buf[i], i == 
msg->len - 1 ? "" : ", ");
+                               for (i = 0; i < msg->len; i++)
+                                       printk("%#04x%s",
+                                                       msg->buf[i],
+                                                       i == msg->len - 1 ?
+                                                       "" : ", ");
                                printk("]\n");
                        }
                }
@@ -241,8 +244,10 @@ static int pca_xfer(struct i2c_adapter *i2c_adap,
                        completed = pca_address(adap, msg);
                        break;
 
-               case 0x18: /* SLA+W has been transmitted; ACK has been received 
*/
-               case 0x28: /* Data byte in I2CDAT has been transmitted; ACK has 
been received */
+               case 0x18: /* SLA+W has been transmitted;
+                             ACK has been received */
+               case 0x28: /* Data byte in I2CDAT has been transmitted;
+                             ACK has been received */
                        if (numbytes < msg->len) {
                                completed = pca_tx_byte(adap,
                                                        msg->buf[numbytes]);
@@ -256,16 +261,19 @@ static int pca_xfer(struct i2c_adapter *i2c_adap,
                                completed = pca_repeated_start(adap);
                        break;
 
-               case 0x20: /* SLA+W has been transmitted; NOT ACK has been 
received */
+               case 0x20: /* SLA+W has been transmitted;
+                             NOT ACK has been received */
                        DEB2("NOT ACK received after SLA+W\n");
                        pca_stop(adap);
                        goto out;
 
-               case 0x40: /* SLA+R has been transmitted; ACK has been received 
*/
+               case 0x40: /* SLA+R has been transmitted;
+                             ACK has been received */
                        completed = pca_rx_ack(adap, msg->len > 1);
                        break;
 
-               case 0x50: /* Data bytes has been received; ACK has been 
returned */
+               case 0x50: /* Data bytes has been received;
+                             ACK has been returned */
                        if (numbytes < msg->len) {
                                pca_rx_byte(adap, &msg->buf[numbytes], 1);
                                numbytes++;
@@ -280,17 +288,20 @@ static int pca_xfer(struct i2c_adapter *i2c_adap,
                                completed = pca_repeated_start(adap);
                        break;
 
-               case 0x48: /* SLA+R has been transmitted; NOT ACK has been 
received */
+               case 0x48: /* SLA+R has been transmitted;
+                             NOT ACK has been received */
                        DEB2("NOT ACK received after SLA+R\n");
                        pca_stop(adap);
                        goto out;
 
-               case 0x30: /* Data byte in I2CDAT has been transmitted; NOT ACK 
has been received */
+               case 0x30: /* Data byte in I2CDAT has been transmitted;
+                             NOT ACK has been received */
                        DEB2("NOT ACK received after data byte\n");
                        pca_stop(adap);
                        goto out;
 
-               case 0x38: /* Arbitration lost during SLA+W, SLA+R or data 
bytes */
+               case 0x38: /* Arbitration lost during SLA+W, SLA+R or
+                             data bytes */
                        DEB2("Arbitration lost\n");
                        /*
                         * The PCA9564 data sheet (2006-09-01) says "A
@@ -304,8 +315,9 @@ static int pca_xfer(struct i2c_adapter *i2c_adap,
                        pca_start(adap);
                        goto out;
 
-               case 0x58: /* Data byte has been received; NOT ACK has been 
returned */
-                       if ( numbytes == msg->len - 1 ) {
+               case 0x58: /* Data byte has been received;
+                             NOT ACK has been returned */
+                       if (numbytes == msg->len - 1) {
                                pca_rx_byte(adap, &msg->buf[numbytes], 0);
                                curmsg++; numbytes = 0;
                                if (curmsg == num)
@@ -328,12 +340,14 @@ static int pca_xfer(struct i2c_adapter *i2c_adap,
                        DEB2("BUS ERROR - SCL Stuck low\n");
                        pca_reset(adap);
                        goto out;
-               case 0x00: /* Bus error during master or slave mode due to 
illegal START or STOP condition */
+               case 0x00: /* Bus error during master or slave mode
+                             due to illegal START or STOP condition */
                        DEB2("BUS ERROR - Illegal START or STOP\n");
                        pca_reset(adap);
                        goto out;
                default:
-                       dev_err(&i2c_adap->dev, "unhandled SIO state 0x%02x\n", 
state);
+                       dev_err(&i2c_adap->dev, "unhandled SIO state 0x%02x\n",
+                                       state);
                        break;
                }
 
@@ -352,7 +366,7 @@ static int pca_xfer(struct i2c_adapter *i2c_adap,
 
 static u32 pca_func(struct i2c_adapter *adap)
 {
-        return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+       return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
 }
 
 static const struct i2c_algorithm pca_algo = {
-- 
1.7.0

--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to