* Manjunatha GK <[email protected]> [100427 07:21]:
> --- a/drivers/i2c/busses/i2c-omap.c
> +++ b/drivers/i2c/busses/i2c-omap.c
> @@ -199,6 +199,7 @@ struct omap_i2c_dev {
> u16 bufstate;
> u16 syscstate;
> u16 westate;
> + bool errata_i207;
> };
Thanks for updating this.
One more comment though to make this more generic for handling
the other errata for i2c-omap.
Can you please make errata_i207 to be just:
u16 errata;
And then we can use it for handing all the i2c-omap errata.
You also need something like
#define I2C_OMAP_ERRATA_I207 (1 << 0)
> const static u8 reg_map[] = {
> @@ -498,6 +499,12 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
> /* Take the I2C module out of reset: */
> omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
>
> + dev->errata_i207 = false;
> +
> + if (cpu_is_omap2430() || cpu_is_omap34xx()) {
> + dev->errata_i207 = true;
> + }
> +
> /* Enable interrupts */
> dev->iestate = (OMAP_I2C_IE_XRDY | OMAP_I2C_IE_RRDY |
> OMAP_I2C_IE_ARDY | OMAP_I2C_IE_NACK |
Then update this for for the bitmask too
dev->errata = 0;
if (cpu_is_omap2430() || cpu_is_omap34xx())
dev->errata |= I2C_OMAP_ERRATA_I207;
> @@ -695,6 +702,34 @@ omap_i2c_ack_stat(struct omap_i2c_dev *dev, u16 stat)
> omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, stat);
> }
>
> +static inline void i2c_omap_errata_i207(struct omap_i2c_dev *dev, u16 stat)
> +{
> + /*
> + * I2C Errata(Errata Nos. OMAP2: 1.67, OMAP3: 1.8)
> + * Not applicable for OMAP4.
> + * Under certain rare conditions, RDR could be set again
> + * when the bus is busy, then ignore the interrupt and
> + * clear the interrupt.
> + */
> + if (stat & OMAP_I2C_STAT_RDR) {
> + /* Step 1: If RDR is set, clear it */
> + omap_i2c_ack_stat(dev, OMAP_I2C_STAT_RDR);
> +
> + /* Step 2: */
> + if(!(omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG)
Here you should have a space after if (
> + & OMAP_I2C_STAT_BB)) {
> +
> + /* Step 3: */
> + if(omap_i2c_read_reg(dev,OMAP_I2C_STAT_REG)
> + & OMAP_I2C_STAT_RDR) {
> + omap_i2c_ack_stat(dev,OMAP_I2C_STAT_RDR);
> + dev_dbg(dev->dev,"RDR when the bus is busy.\n");
> + }
> +
> + }
> + }
> +}
> +
> /* rev1 devices are apparently only on some 15xx */
> #ifdef CONFIG_ARCH_OMAP15XX
>
> @@ -826,6 +861,10 @@ complete:
> }
> if (stat & (OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR)) {
> u8 num_bytes = 1;
> +
> + if (dev->errata_i207)
> + i2c_omap_errata_i207(dev, stat);
> +
> if (dev->fifo_size) {
> if (stat & OMAP_I2C_STAT_RRDY)
> num_bytes = dev->fifo_size;
> --
And here you would need to test for the bitmask instead.
Regards,
Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
