On Sun, May 9, 2010 at 07:34, Ben Dooks wrote: > On Sun, May 09, 2010 at 07:04:47AM -0400, Mike Frysinger wrote: >> From: Michael Hennerich <[email protected]> >> >> Faulty slave devices might drive SDA low after a transfer finishes. So, >> when this scenario is detected, have the master generate up to 8 extra >> clocks until the SDA is properly released. >> >> Signed-off-by: Michael Hennerich <[email protected]> >> Signed-off-by: Mike Frysinger <[email protected]> >> --- >> Note: this requires the existing Blackfin TWI patches already sent out > > hmm, it is late in the -rc series for anything other than critical > bugfixes, will update series tomorrow.
this patch is fine for 2.6.35, but the rest of the series should have been merged for like 2.6.33 ... >> drivers/i2c/busses/i2c-bfin-twi.c | 22 ++++++++++++++++++++++ >> 1 files changed, 22 insertions(+), 0 deletions(-) >> >> diff --git a/drivers/i2c/busses/i2c-bfin-twi.c >> b/drivers/i2c/busses/i2c-bfin-twi.c >> index fb26e5c..f9c05e1 100644 >> --- a/drivers/i2c/busses/i2c-bfin-twi.c >> +++ b/drivers/i2c/busses/i2c-bfin-twi.c >> @@ -20,6 +20,7 @@ >> #include <linux/completion.h> >> #include <linux/interrupt.h> >> #include <linux/platform_device.h> >> +#include <linux/delay.h> >> >> #include <asm/blackfin.h> >> #include <asm/portmux.h> >> @@ -159,6 +160,27 @@ static void bfin_twi_handle_interrupt(struct >> bfin_twi_iface *iface, >> if (mast_stat & BUFWRERR) >> dev_dbg(&iface->adap.dev, "Buffer Write Error\n"); >> >> + /* Faulty salve devices, may drive SDA low after a transfer > spello: slave ok, i'll resend in a bit -mike -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
