Hi Wolfram, On Fri, 28 May 2010 04:18:48 +0200, Wolfram Sang wrote: > And fix a typo while we are here. > > Signed-off-by: Wolfram Sang <[email protected]> > Cc: Jean Delvare <[email protected]> > --- > > I moved the drivers before I checked how many of the embedded drivers do > subsys_initcall() and how many don't (13 vs 19 BTW); and to check if it makes > sense to mass-convert the latter. However, I still feel that such a change > should better be done per driver if there is somebody needing it and willing > to > test, so this patch is the only outcome of my investigation :) > > drivers/i2c/busses/Makefile | 6 +++--- > 1 files changed, 3 insertions(+), 3 deletions(-) > > diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile > index 097236f..936880b 100644 > --- a/drivers/i2c/busses/Makefile > +++ b/drivers/i2c/busses/Makefile > @@ -27,7 +27,7 @@ obj-$(CONFIG_I2C_VIAPRO) += i2c-viapro.o > obj-$(CONFIG_I2C_HYDRA) += i2c-hydra.o > obj-$(CONFIG_I2C_POWERMAC) += i2c-powermac.o > > -# Embebbed system I2C/SMBus host controller drivers > +# Embedded system I2C/SMBus host controller drivers > obj-$(CONFIG_I2C_AT91) += i2c-at91.o > obj-$(CONFIG_I2C_AU1550) += i2c-au1550.o > obj-$(CONFIG_I2C_BLACKFIN_TWI) += i2c-bfin-twi.o > @@ -46,6 +46,8 @@ obj-$(CONFIG_I2C_NOMADIK) += i2c-nomadik.o > obj-$(CONFIG_I2C_OCORES) += i2c-ocores.o > obj-$(CONFIG_I2C_OMAP) += i2c-omap.o > obj-$(CONFIG_I2C_PASEMI) += i2c-pasemi.o > +obj-$(CONFIG_I2C_PCA_PLATFORM) += i2c-pca-platform.o > +obj-$(CONFIG_I2C_PMCMSP) += i2c-pmcmsp.o > obj-$(CONFIG_I2C_PNX) += i2c-pnx.o > obj-$(CONFIG_I2C_PXA) += i2c-pxa.o > obj-$(CONFIG_I2C_S3C2410) += i2c-s3c2410.o > @@ -68,8 +70,6 @@ obj-$(CONFIG_I2C_TINY_USB) += i2c-tiny-usb.o > obj-$(CONFIG_I2C_ACORN) += i2c-acorn.o > obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o > obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o > -obj-$(CONFIG_I2C_PCA_PLATFORM) += i2c-pca-platform.o > -obj-$(CONFIG_I2C_PMCMSP) += i2c-pmcmsp.o > obj-$(CONFIG_I2C_SIBYTE) += i2c-sibyte.o > obj-$(CONFIG_I2C_STUB) += i2c-stub.o > obj-$(CONFIG_SCx200_ACB) += scx200_acb.o
If you move them in Makefile, you have to move them in Kconfig as well, otherwise it gets confusing. -- Jean Delvare -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
