Vishwanath BS <[email protected]> writes:

> In current i2c core driver, pm_runtime_set_active call from 
> i2c_device_pm_resume
> is not balanced by pm_runtime_set_suspended call from i2c_device_pm_suspend.
> pm_runtime_set_active called from resume path will increase the child_count of
> the device's parent. However, matching pm_runtime_set_suspended is not called
> in suspend routine because of which child_count of the device's parent
> is not balanced, preventing the parent device to idle.
> Issue has been fixed by adding pm_runtime_set_suspended call inside suspend
> reoutine which will make sure that child_counts are balanced.
> This fix has been tested on OMAP4430.
>
> Signed-off-by: Partha Basak <[email protected]>
> Signed-off-by: Vishwanath BS <[email protected]>
>
> Cc: Rafael J. Wysocki <[email protected]>
> Cc: Kevin Hilman <[email protected]>
> Cc: Ben Dooks <[email protected]>

Also Cc'ing Mark Brown as original author of runtime PM for i2-core.

Kevin

> ---
>  drivers/i2c/i2c-core.c |   12 ++++++++++--
>  1 files changed, 10 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
> index 6649176..3146bff
> --- a/drivers/i2c/i2c-core.c
> +++ b/drivers/i2c/i2c-core.c
> @@ -196,14 +196,22 @@ static int i2c_legacy_resume(struct device *dev)
>  static int i2c_device_pm_suspend(struct device *dev)
>  {
>       const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
> +     int ret;
>  
>       if (pm_runtime_suspended(dev))
>               return 0;
>  
>       if (pm)
> -             return pm->suspend ? pm->suspend(dev) : 0;
> +             ret = pm->suspend ? pm->suspend(dev) : 0;
> +     else
> +             ret = i2c_legacy_suspend(dev, PMSG_SUSPEND);
>  
> -     return i2c_legacy_suspend(dev, PMSG_SUSPEND);
> +     if (!ret) {
> +             pm_runtime_disable(dev);
> +             pm_runtime_set_suspended(dev);
> +             pm_runtime_enable(dev);
> +     }
> +     return ret;
>  }
>  
>  static int i2c_device_pm_resume(struct device *dev)
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to