From: Xiao Jiang <[email protected]>

The following changes are ensure at24 driver can be probed successfully,
which are based on Linux 2.6.36-rc5.
1. Add class, detect and address_list member in at24_driver because they
   will be check in i2c_detect().
2. Since the at24 driver are tightly coupled with i2c bus driver, make
   sure it's init priority is lower than i2c bus.

Signed-off-by: Xiao Jiang <[email protected]>
---
 drivers/misc/eeprom/at24.c |   16 +++++++++++++++-
 1 files changed, 15 insertions(+), 1 deletions(-)

diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
index 559b0b3..a40f74e 100644
--- a/drivers/misc/eeprom/at24.c
+++ b/drivers/misc/eeprom/at24.c
@@ -129,6 +129,9 @@ static const struct i2c_device_id at24_ids[] = {
 };
 MODULE_DEVICE_TABLE(i2c, at24_ids);
 
+/* Addresses to scan */
+static const unsigned short normal_i2c[] = { 0x50, 0x51, 0x52, 0x53, 0x54,
+                                       0x55, 0x56, 0x57, I2C_CLIENT_END };
 /*-------------------------------------------------------------------------*/
 
 /*
@@ -646,6 +649,13 @@ static int __devexit at24_remove(struct i2c_client *client)
        return 0;
 }
 
+static int at24_detect(struct i2c_client *client, struct i2c_board_info *info)
+{
+       strlcpy(info->type, "at24", I2C_NAME_SIZE);
+
+       return 0;
+}
+
 /*-------------------------------------------------------------------------*/
 
 static struct i2c_driver at24_driver = {
@@ -656,6 +666,10 @@ static struct i2c_driver at24_driver = {
        .probe = at24_probe,
        .remove = __devexit_p(at24_remove),
        .id_table = at24_ids,
+
+       .class = I2C_CLASS_SPD,
+       .detect = at24_detect,
+       .address_list = normal_i2c,
 };
 
 static int __init at24_init(void)
@@ -663,7 +677,7 @@ static int __init at24_init(void)
        io_limit = rounddown_pow_of_two(io_limit);
        return i2c_add_driver(&at24_driver);
 }
-module_init(at24_init);
+device_initcall_sync(at24_init);
 
 static void __exit at24_exit(void)
 {
-- 
1.6.3.3

--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to