The davinci-i2c bus driver currently supports being probed with a NULL
platform_data structure by using a default configuration when none is
provided.  However, the i2c_davinci_calc_clk_dividers does not
check the provided platform_data for NULL prior to using it, so
the support is incomplete.

Rather than have each runtime call check for NULL and avoid future
problems, copy a pointer to the default data to the device structure
during the probe.  This should be OK, as the information in this
structure is not modified by the driver.

Tested on a MityDSP-L138 module (OMAP-L138 based SOM).

Signed-off-by: Micahel Williamson <[email protected]>
---
 drivers/i2c/busses/i2c-davinci.c |   12 +++++-------
 1 files changed, 5 insertions(+), 7 deletions(-)

diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index 5795c83..1db8fc9 100644
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -163,8 +163,7 @@ static void i2c_recover_bus(struct davinci_i2c_dev *dev)
        flag |=  DAVINCI_I2C_MDR_NACK;
        /* write the data into mode register */
        davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, flag);
-       if (pdata)
-               generic_i2c_clock_pulse(pdata->scl_pin);
+       generic_i2c_clock_pulse(pdata->scl_pin);
        /* Send STOP */
        flag = davinci_i2c_read_reg(dev, DAVINCI_I2C_MDR_REG);
        flag |= DAVINCI_I2C_MDR_STP;
@@ -235,10 +234,11 @@ static void i2c_davinci_calc_clk_dividers(struct 
davinci_i2c_dev *dev)
  */
 static int i2c_davinci_init(struct davinci_i2c_dev *dev)
 {
-       struct davinci_i2c_platform_data *pdata = dev->dev->platform_data;
+       struct davinci_i2c_platform_data *pdata;
 
-       if (!pdata)
-               pdata = &davinci_i2c_platform_data_default;
+       if (!dev->dev->platform_data)
+               dev->dev->platform_data = &davinci_i2c_platform_data_default;
+       pdata = dev->dev->platform_data;
 
        /* put I2C into reset */
        davinci_i2c_reset_ctrl(dev, 0);
@@ -313,8 +313,6 @@ i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct 
i2c_msg *msg, int stop)
        u16 w;
        int r;
 
-       if (!pdata)
-               pdata = &davinci_i2c_platform_data_default;
        /* Introduce a delay, required for some boards (e.g Davinci EVM) */
        if (pdata->bus_delay)
                udelay(pdata->bus_delay);
-- 
1.7.0.4

--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to