Hello, Ben,

Are you going to integrate Marvel's i2c patches dated March 31 to the
kernel tree?

Thank you for your help
Konstantin

On Thu, Mar 31, 2011 at 5:40 PM, Konstantin Porotchkin
<[email protected]> wrote:
> Eliminate erroneus data send in combined access mode when INT
> is cleared in i2c controller. Instead disable INT delivery to CPU
> and re-enable it on the next START.
>
> Signed-off-by: Konstantin Porotchkin <[email protected]>
> ---
>  drivers/i2c/busses/i2c-mv64xxx.c |   19 +++++++++++++++----
>  1 files changed, 15 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-mv64xxx.c 
> b/drivers/i2c/busses/i2c-mv64xxx.c
> index a9941c6..d013e25 100644
> --- a/drivers/i2c/busses/i2c-mv64xxx.c
> +++ b/drivers/i2c/busses/i2c-mv64xxx.c
> @@ -15,6 +15,7 @@
>  #include <linux/spinlock.h>
>  #include <linux/i2c.h>
>  #include <linux/interrupt.h>
> +#include <linux/delay.h>
>  #include <linux/mv643xx_i2c.h>
>  #include <linux/platform_device.h>
>  #include <linux/io.h>
> @@ -98,6 +99,7 @@ struct mv64xxx_i2c_data {
>        int                     rc;
>        u32                     freq_m;
>        u32                     freq_n;
> +       int                     irq_disabled;
>        wait_queue_head_t       waitq;
>        spinlock_t              lock;
>        struct i2c_msg          *msg;
> @@ -239,10 +241,11 @@ mv64xxx_i2c_do_action(struct mv64xxx_i2c_data *drv_data)
>  {
>        switch(drv_data->action) {
>        case MV64XXX_I2C_ACTION_SEND_RESTART:
> -               drv_data->cntl_bits |= MV64XXX_I2C_REG_CONTROL_START;
> -               drv_data->cntl_bits &= ~MV64XXX_I2C_REG_CONTROL_INTEN;
> -               writel(drv_data->cntl_bits,
> -                       drv_data->reg_base + MV64XXX_I2C_REG_CONTROL);
> +               /* can't mask interrupts by clearing the INTEN as this
> +                * triggers the controller to send the data.
> +                */
> +               drv_data->irq_disabled = 1;
> +               disable_irq_nosync(drv_data->irq);
>                drv_data->block = 0;
>                wake_up_interruptible(&drv_data->waitq);
>                break;
> @@ -255,6 +258,11 @@ mv64xxx_i2c_do_action(struct mv64xxx_i2c_data *drv_data)
>        case MV64XXX_I2C_ACTION_SEND_START:
>                writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_START,
>                        drv_data->reg_base + MV64XXX_I2C_REG_CONTROL);
> +               if (drv_data->irq_disabled) {
> +                       udelay(3);
> +                       drv_data->irq_disabled = 0;
> +                       enable_irq(drv_data->irq);
> +               }
>                break;
>
>        case MV64XXX_I2C_ACTION_SEND_ADDR_1:
> @@ -327,6 +335,8 @@ mv64xxx_i2c_intr(int irq, void *dev_id)
>                mv64xxx_i2c_fsm(drv_data, status);
>                mv64xxx_i2c_do_action(drv_data);
>                rc = IRQ_HANDLED;
> +               if (drv_data->state == MV64XXX_I2C_STATE_WAITING_FOR_RESTART)
> +                       break;
>        }
>        spin_unlock_irqrestore(&drv_data->lock, flags);
>
> @@ -553,6 +563,7 @@ mv64xxx_i2c_probe(struct platform_device *pd)
>                rc = -ENXIO;
>                goto exit_unmap_regs;
>        }
> +       drv_data->irq_disabled = 0;
>        drv_data->adapter.dev.parent = &pd->dev;
>        drv_data->adapter.algo = &mv64xxx_i2c_algo;
>        drv_data->adapter.owner = THIS_MODULE;
> --
> 1.7.4.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
> the body of a message to [email protected]
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to