From: Virupax Sadashivpetimath <[email protected]>
The delay in the driver seems to be not needed, so remove it. Signed-off-by: Virupax Sadashivpetimath <[email protected]> Reviewed-by: Markus Grape <[email protected]> Tested-by: Per Persson <[email protected]> Tested-by: Chethan Krishna N <[email protected]> Reviewed-by: Srinidhi Kasagar <[email protected]> Signed-off-by: Linus Walleij <[email protected]> --- drivers/i2c/busses/i2c-nomadik.c | 20 ++------------------ 1 files changed, 2 insertions(+), 18 deletions(-) diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c index e3cd62e..b2de1a5 100644 --- a/drivers/i2c/busses/i2c-nomadik.c +++ b/drivers/i2c/busses/i2c-nomadik.c @@ -15,7 +15,6 @@ #include <linux/init.h> #include <linux/module.h> #include <linux/platform_device.h> -#include <linux/delay.h> #include <linux/slab.h> #include <linux/interrupt.h> #include <linux/i2c.h> @@ -105,9 +104,6 @@ /* maximum threshold value */ #define MAX_I2C_FIFO_THRESHOLD 15 -/* per-transfer delay, required for the hardware to stabilize */ -#define I2C_DELAY 150 - enum i2c_status { I2C_NOP, I2C_ON_GOING, @@ -269,12 +265,6 @@ static int init_hw(struct nmk_i2c_dev *dev) dev->cli.operation = I2C_NO_OPERATION; exit: - /* - * TODO: What is this delay for? - * Must be pretty pointless since the hw block - * is frozen. Or? - */ - udelay(I2C_DELAY); return stat; } @@ -652,7 +642,6 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap, break; } - udelay(I2C_DELAY); } if (status == 0) break; @@ -778,13 +767,8 @@ static irqreturn_t i2c_irq_handler(int irq, void *arg) } } - i2c_set_bit(dev->virtbase + I2C_ICR, I2C_IT_MTD); - i2c_set_bit(dev->virtbase + I2C_ICR, I2C_IT_MTDWS); - - disable_interrupts(dev, - (I2C_IT_TXFNE | I2C_IT_TXFE | I2C_IT_TXFF - | I2C_IT_TXFOVR | I2C_IT_RXFNF - | I2C_IT_RXFF | I2C_IT_RXFE)); + disable_all_interrupts(dev); + clear_all_interrupts(dev); if (dev->cli.count) { dev->result = -EIO; -- 1.7.5.1 -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
