* Print all error and information messages even when debugging is disabled. * Don't use adapter device to log messages before it is ready.
Signed-off-by: Jean Delvare <[email protected]> --- drivers/i2c/busses/i2c-taos-evm.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) --- linux-3.0-rc2.orig/drivers/i2c/busses/i2c-taos-evm.c 2010-08-02 00:11:14.000000000 +0200 +++ linux-3.0-rc2/drivers/i2c/busses/i2c-taos-evm.c 2011-06-08 18:06:32.000000000 +0200 @@ -234,7 +234,7 @@ static int taos_connect(struct serio *se if (taos->state != TAOS_STATE_IDLE) { err = -ENODEV; - dev_dbg(&serio->dev, "TAOS EVM reset failed (state=%d, " + dev_err(&serio->dev, "TAOS EVM reset failed (state=%d, " "pos=%d)\n", taos->state, taos->pos); goto exit_close; } @@ -255,7 +255,7 @@ static int taos_connect(struct serio *se msecs_to_jiffies(250)); if (taos->state != TAOS_STATE_IDLE) { err = -ENODEV; - dev_err(&adapter->dev, "Echo off failed " + dev_err(&serio->dev, "TAOS EVM echo off failed " "(state=%d)\n", taos->state); goto exit_close; } @@ -263,7 +263,7 @@ static int taos_connect(struct serio *se err = i2c_add_adapter(adapter); if (err) goto exit_close; - dev_dbg(&serio->dev, "Connected to TAOS EVM\n"); + dev_info(&serio->dev, "Connected to TAOS EVM\n"); taos->client = taos_instantiate_device(adapter); return 0; @@ -288,7 +288,7 @@ static void taos_disconnect(struct serio serio_set_drvdata(serio, NULL); kfree(taos); - dev_dbg(&serio->dev, "Disconnected from TAOS EVM\n"); + dev_info(&serio->dev, "Disconnected from TAOS EVM\n"); } static struct serio_device_id taos_serio_ids[] = { -- Jean Delvare -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
