From: Dirk Brandewie <[email protected]> Add check to make sure that the core is enabled and has outstanding interrupts. The activity bit is masked due to the fact that it will stay active even after the controller has been disabled until the contoller internal state machines have settled.
Signed-off-by: Dirk Brandewie <[email protected]> Signed-off-by: Ben Dooks <[email protected]> --- drivers/i2c/busses/i2c-designware-core.c | 10 ++++++++-- 1 files changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c index 9de672f..11909eb 100644 --- a/drivers/i2c/busses/i2c-designware-core.c +++ b/drivers/i2c/busses/i2c-designware-core.c @@ -521,10 +521,16 @@ static u32 i2c_dw_read_clear_intrbits(struct dw_i2c_dev *dev) irqreturn_t i2c_dw_isr(int this_irq, void *dev_id) { struct dw_i2c_dev *dev = dev_id; - u32 stat; + u32 stat, enabled; + + enabled = dw_readl(dev, DW_IC_ENABLE); + stat = dw_readl(dev, DW_IC_RAW_INTR_STAT); + dev_dbg(dev->dev, "%s: %s enabled= 0x%x stat=0x%x\n", __func__, + dev->adapter.name, enabled, stat); + if (!enabled || !(stat & ~DW_IC_INTR_ACTIVITY)) + return IRQ_NONE; stat = i2c_dw_read_clear_intrbits(dev); - dev_dbg(dev->dev, "%s: stat=0x%x\n", __func__, stat); if (stat & DW_IC_INTR_TX_ABRT) { dev->cmd_err |= DW_IC_ERR_TX_ABRT; -- 1.7.3.4 -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
