On Tue, Jan 17, 2012 at 07:18:20PM +0530, Jayachandran C. wrote:
> From: Ganesan Ramalingam <[email protected]>
>
> Add support for the intergrated I2C controller on Netlogic
> XLR/XLS MIPS SoC.
>
> The changes are to add a new file i2c/buses/i2c-xlr.c, containing the
> i2c bus implementation, and to update i2c/buses/{Kconfig,Makefile} to
> add the CONFIG_I2C_XLR option.
>
> Signed-off-by: Ganesan Ramalingam <[email protected]>
> Signed-off-by: Jayachandran C <[email protected]>
> ---
> drivers/i2c/busses/Kconfig | 14 ++
> drivers/i2c/busses/Makefile | 1 +
> drivers/i2c/busses/i2c-xlr.c | 307
> ++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 322 insertions(+), 0 deletions(-)
> create mode 100644 drivers/i2c/busses/i2c-xlr.c
>
> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
> index cbe7a2f..7052628 100644
> --- a/drivers/i2c/busses/Kconfig
> +++ b/drivers/i2c/busses/Kconfig
> @@ -308,6 +308,20 @@ config I2C_AU1550
> This driver can also be built as a module. If so, the module
> will be called i2c-au1550.
>
> +config I2C_XLR
> + tristate "XLR I2C support"
> + depends on CPU_XLR
> + help
> + This driver enables support for the on-chip I2C interface of
> + the Netlogic XLR/XLS MIPS processors.
> +
> + Say yes to this option if you have a Netlogic XLR/XLS based
> + board and you need to access the I2C devices (typically the
> + RTC, sensors, EEPROM) connected to this interface.
> +
> + This driver can also be built as a module. If so, the module
> + will be called i2c-au1550.
> +
> config I2C_BLACKFIN_TWI
> tristate "Blackfin TWI I2C support"
> depends on BLACKFIN
> diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
> index fba6da6..4372dee 100644
> --- a/drivers/i2c/busses/Makefile
> +++ b/drivers/i2c/busses/Makefile
> @@ -68,6 +68,7 @@ obj-$(CONFIG_I2C_TEGRA) += i2c-tegra.o
> obj-$(CONFIG_I2C_VERSATILE) += i2c-versatile.o
> obj-$(CONFIG_I2C_OCTEON) += i2c-octeon.o
> obj-$(CONFIG_I2C_XILINX) += i2c-xiic.o
> +obj-$(CONFIG_I2C_XLR) += i2c-xlr.o
> obj-$(CONFIG_I2C_EG20T) += i2c-eg20t.o
>
> # External I2C/SMBus adapter drivers
> diff --git a/drivers/i2c/busses/i2c-xlr.c b/drivers/i2c/busses/i2c-xlr.c
> new file mode 100644
> index 0000000..6da0fa9
> --- /dev/null
> +++ b/drivers/i2c/busses/i2c-xlr.c
> @@ -0,0 +1,307 @@
> +/*
> + * Copyright 2011, Netlogic Microsystems Inc.
> + * Copyright 2004, Matt Porter <[email protected]>
> + *
> + * This file is licensed under the terms of the GNU General Public
> + * License version 2. This program is licensed "as is" without any
> + * warranty of any kind, whether express or implied.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/slab.h>
> +#include <linux/init.h>
> +#include <linux/ioport.h>
> +#include <linux/errno.h>
> +#include <linux/i2c.h>
> +#include <linux/io.h>
> +#include <linux/platform_device.h>
> +
> +/* XLR I2C REGISTERS */
> +#define XLR_I2C_CFG 0x00
> +#define XLR_I2C_CLKDIV 0x01
> +#define XLR_I2C_DEVADDR 0x02
> +#define XLR_I2C_ADDR 0x03
> +#define XLR_I2C_DATAOUT 0x04
> +#define XLR_I2C_DATAIN 0x05
> +#define XLR_I2C_STATUS 0x06
> +#define XLR_I2C_STARTXFR 0x07
> +#define XLR_I2C_BYTECNT 0x08
> +#define XLR_I2C_HDSTATIM 0x09
> +
> +/* XLR I2C REGISTERS FLAGS */
> +#define XLR_I2C_BUS_BUSY 0x01
> +#define XLR_I2C_SDOEMPTY 0x02
> +#define XLR_I2C_RXRDY 0x04
> +#define XLR_I2C_ACK_ERR 0x08
> +#define XLR_I2C_ARB_STARTERR 0x30
> +
> +/* Register Values */
> +#define XLR_I2C_CFG_ADDR 0xF8
> +#define XLR_I2C_CFG_NOADDR 0xFA
> +#define XLR_I2C_STARTXFR_ND 0x02 /* No Data */
> +#define XLR_I2C_STARTXFR_RD 0x01 /* Read */
> +#define XLR_I2C_STARTXFR_WR 0x00 /* Write */
> +
> +#define XLR_I2C_IO_SIZE 0x1000
> +
> +#define MAX_RETRIES 10000 /* max retries per byte */
> +/*
> + * Need un-swapped IO for the SoC I2C registers, use __raw_ IO
> + */
> +static inline void xlr_i2c_wreg(u32 __iomem *base, unsigned int reg, u32 val)
> +{
> + __raw_writel(val, base + reg);
> +}
> +
> +static inline u32 xlr_i2c_rdreg(u32 __iomem *base, unsigned int reg)
> +{
> + return __raw_readl(base + reg);
> +}
Here, there's the use of __raw accessors with memory returned from
ioremap(). Please use readl/writel here, or provide a _good_ reason
for not using them.
> +struct xlr_i2c_private {
> + struct i2c_adapter adap;
> + u32 __iomem *iobase;
> +};
> +
> +static int xlr_i2c_tx(struct xlr_i2c_private *priv, u16 len,
> + u8 *buf, u16 addr)
> +{
> + struct i2c_adapter *adap = &priv->adap;
> + u32 i2c_status;
> + int pos, retries;
> + u8 offset, nb;
> +
> + offset = buf[0];
> + xlr_i2c_wreg(priv->iobase, XLR_I2C_ADDR, offset);
> + xlr_i2c_wreg(priv->iobase, XLR_I2C_DEVADDR, addr);
> + xlr_i2c_wreg(priv->iobase, XLR_I2C_CFG, XLR_I2C_CFG_ADDR);
> + xlr_i2c_wreg(priv->iobase, XLR_I2C_BYTECNT, len - 1);
> +
> + retries = 0;
> +retry:
> + pos = 1;
> + if (len == 1) {
> + xlr_i2c_wreg(priv->iobase, XLR_I2C_STARTXFR,
> + XLR_I2C_STARTXFR_ND);
> + } else {
> + xlr_i2c_wreg(priv->iobase, XLR_I2C_DATAOUT, buf[pos]);
> + xlr_i2c_wreg(priv->iobase, XLR_I2C_STARTXFR,
> + XLR_I2C_STARTXFR_WR);
> + }
> +
> + while (1) {
> + if (retries++ > MAX_RETRIES) {
> + dev_err(&adap->dev, "I2C transmit timeout\n");
> + return -ETIMEDOUT;
> + }
> +
> + i2c_status = xlr_i2c_rdreg(priv->iobase, XLR_I2C_STATUS);
> +
> + if (i2c_status & XLR_I2C_SDOEMPTY) {
> + pos++;
> + retries = 0;
> + nb = (pos < len) ? buf[pos] : 0;
> + xlr_i2c_wreg(priv->iobase, XLR_I2C_DATAOUT, nb);
> + }
> +
> + if (i2c_status & XLR_I2C_ARB_STARTERR)
> + goto retry;
> +
> + if (i2c_status & XLR_I2C_ACK_ERR)
> + return -EIO;
> +
> + if (i2c_status & XLR_I2C_BUS_BUSY)
> + continue;
> +
> + if (pos >= len)
> + break;
> + }
> +
> + return 0;
> +}
> +
> +static int xlr_i2c_rx(struct xlr_i2c_private *priv, u16 len, u8 *buf, u16
> addr)
> +{
> + struct i2c_adapter *adap = &priv->adap;
> + u32 i2c_status;
> + int pos, retries;
> +
> + xlr_i2c_wreg(priv->iobase, XLR_I2C_CFG, XLR_I2C_CFG_NOADDR);
> + xlr_i2c_wreg(priv->iobase, XLR_I2C_BYTECNT, len);
> + xlr_i2c_wreg(priv->iobase, XLR_I2C_DEVADDR, addr);
> +
> + retries = 0;
> + pos = 0;
> +retry:
> + xlr_i2c_wreg(priv->iobase, XLR_I2C_STARTXFR, XLR_I2C_STARTXFR_RD);
> +
> + while (1) {
> + if (retries++ > MAX_RETRIES) {
> + dev_err(&adap->dev, "I2C receive timeout\n");
> + return -ETIMEDOUT;
> + }
> +
> + i2c_status = xlr_i2c_rdreg(priv->iobase, XLR_I2C_STATUS);
> + if (i2c_status & XLR_I2C_RXRDY) {
> + buf[pos++] = (u8)xlr_i2c_rdreg(priv->iobase,
> + XLR_I2C_DATAIN);
> + retries = 0;
> + }
> +
> + if (i2c_status & XLR_I2C_ARB_STARTERR)
> + goto retry;
> +
> + if (i2c_status & XLR_I2C_ACK_ERR) {
> + dev_err(&adap->dev, "I2C receive ACK error\n");
> + return -EIO;
> + }
> +
> + if ((i2c_status & XLR_I2C_BUS_BUSY) == 0)
> + break;
> + }
> + return 0;
> +}
> +
> +static int xlr_i2c_xfer(struct i2c_adapter *adap,
> + struct i2c_msg *msgs, int num)
> +{
> + struct i2c_msg *msg;
> + int i;
> + int ret = 0;
> + struct xlr_i2c_private *priv = i2c_get_adapdata(adap);
> +
> + for (i = 0; ret == 0 && i < num; i++) {
> + msg = &msgs[i];
> + if (msg->flags & I2C_M_RD)
> + ret = xlr_i2c_rx(priv, msg->len, &msg->buf[0],
> + msg->addr);
> + else
> + ret = xlr_i2c_tx(priv, msg->len, &msg->buf[0],
> + msg->addr);
> + }
> +
> + return (ret != 0) ? ret : num;
> +}
> +
> +static u32 xlr_func(struct i2c_adapter *adap)
> +{
> + /* Emulate SMBUS over I2C */
> + return I2C_FUNC_SMBUS_EMUL | I2C_FUNC_I2C;
> +}
> +
> +static struct i2c_algorithm xlr_i2c_algo = {
> + .master_xfer = xlr_i2c_xfer,
> + .functionality = xlr_func,
> +};
> +
> +static int xlr_i2c_add_bus(struct xlr_i2c_private *priv)
> +{
> + priv->adap.owner = THIS_MODULE;
> + priv->adap.algo_data = priv;
> + priv->adap.nr = 1;
> + priv->adap.algo = &xlr_i2c_algo;
> + priv->adap.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
> + snprintf(priv->adap.name, sizeof(priv->adap.name),
> + "SMBus XLR I2C Adapter");
> + i2c_set_adapdata(&priv->adap, priv);
> + /* register new adapter to i2c module... */
> + if (i2c_add_numbered_adapter(&priv->adap))
> + return -1;
> +
> + return 0;
> +}
> +
> +static int __devinit xlr_i2c_probe(struct platform_device *pdev)
> +{
> + struct xlr_i2c_private *priv;
> + struct resource *res;
> + int ret;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +
> + if (!res) {
> + ret = -ENXIO;
> + goto err1;
> + }
> +
> + if (!request_mem_region(res->start, XLR_I2C_IO_SIZE, pdev->name)) {
> + dev_err(&pdev->dev, "request_mem_region failed\n");
> + ret = -ENOMEM;
> + goto err1;
> + }
> +
> + priv = kzalloc(sizeof(*priv), GFP_KERNEL);
> + if (!priv) {
> + ret = -ENOMEM;
> + goto err2;
> + }
> +
> + priv->adap.dev.parent = &pdev->dev;
> + priv->iobase = ioremap(res->start, XLR_I2C_IO_SIZE);
> + if (!priv->iobase) {
> + ret = -ENOMEM;
> + goto err3;
> + }
> +
> + platform_set_drvdata(pdev, priv);
> + ret = xlr_i2c_add_bus(priv);
> +
> + if (ret < 0) {
> + dev_err(&priv->adap.dev, "Failed to add i2c bus.\n");
> + ret = -ENXIO;
Hmm, not sure if -ENXIO is the best return code form here. I would probably
leave the 'ret' alone, and pass it to the upper layer.
> + goto err4;
> + } else
> + dev_info(&priv->adap.dev, "Added I2C Bus.\n");
> +
> + return 0;
> +err4:
> + iounmap(priv->iobase);
> + platform_set_drvdata(pdev, NULL);
> +err3:
> + kfree(priv);
> +err2:
> + release_mem_region(res->start, IORESOURCE_MEM);
> +err1:
> + return ret;
> +}
> +
> +static int __devexit xlr_i2c_remove(struct platform_device *pdev)
> +{
> + struct xlr_i2c_private *priv = platform_get_drvdata(pdev);
> + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +
> + i2c_del_adapter(&priv->adap);
> + iounmap(priv->iobase);
> + kfree(priv);
> + release_mem_region(res->start, IORESOURCE_MEM);
> + platform_set_drvdata(pdev, NULL);
> + return 0;
> +}
> +
> +static struct platform_driver xlr_i2c_driver = {
> + .probe = xlr_i2c_probe,
> + .remove = __devexit_p(xlr_i2c_remove),
> + .driver = {
> + .owner = THIS_MODULE,
> + .name = "xlr-i2cbus",
> + },
> +};
> +
> +static int __init xlr_i2c_init(void)
> +{
> + return platform_driver_register(&xlr_i2c_driver);
> +}
> +
> +static void __exit xlr_i2c_exit(void)
> +{
> + platform_driver_unregister(&xlr_i2c_driver);
> +}
> +
> +MODULE_AUTHOR("Ganesan Ramalingam <[email protected]>");
> +MODULE_DESCRIPTION("XLR I2C SMBus driver");
> +MODULE_LICENSE("GPL");
> +MODULE_ALIAS("platform:xlr-i2cbus");
> +
> +module_init(xlr_i2c_init);
> +module_exit(xlr_i2c_exit);
> --
> 1.7.5.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
