Hi Sascha, > +config I2C_CONGATEC_CGEB > + tristate "Congatec CGEB I2C driver" > + depends on MFD_CONGATEC_CGEB > + help > + This driver provides support for the I2C busses accssable via > + the Congatec CGEB interface found on Congatec boards. > +
Please keep the sorting (eg20t is wrong and will be fixed).
> + ret = cgeb_call(priv->board, &fps, CgebI2CTransfer);
> + if (ret) {
> + ret = -EREMOTEIO;
> + goto out;
> + }
-EREMOTEIO is not present in Documentation/i2c/fault-codes. Please use
one from that file.
> + ret = cgeb_i2c_set_speed(priv, 400000);
> + if (ret)
> + /*
> + * not a critical error, we can continue with the default speed.
> + */
> + dev_warn(&pdev->dev, "Could not set speed to 400KHz\n");
Is it possible to make this configurable? Not all I2C devices support
400KHz, 100KHz is OK.
> +static struct platform_driver cgeb_i2c_driver = {
> + .probe = cgeb_i2c_probe,
> + .remove = __exit_p(cgeb_i2c_remove),
__devexit_p()
> +static int __init cgeb_i2c_driver_init(void)
> +{
> + return platform_driver_register(&cgeb_i2c_driver);
> +}
> +
> +static void __exit cgeb_i2c_driver_exit(void)
> +{
> + platform_driver_unregister(&cgeb_i2c_driver);
> +}
> +
> +module_init(cgeb_i2c_driver_init);
> +module_exit(cgeb_i2c_driver_exit);
module_platform_driver();
Regards,
Wolfram
--
Pengutronix e.K. | Wolfram Sang |
Industrial Linux Solutions | http://www.pengutronix.de/ |
signature.asc
Description: Digital signature
