On 2/27/2012 3:40 PM, Rajeev KUMAR wrote:
> In some i2c controller (like synopsys) you dont have control over i2c
> data and clock lines. So clock toggling, you need to use gpio lines
> which in turns maps on sda and scl line.
>
> For the controller in which you have control over sda and scl line there
> is not need for gpio lines. You can directly write on registers.
>
> So to make the function more generic its better to control i2c lines
> with gpio.
There would be many drivers where we need to convert i2c pins to gpio pins
and generate clock pulses:
gpio_request(gpio);
gpio_set_direction(gpio, out, 0);
for (i = 1; i < count; i++) {
gpio set val(gpio, 1);
gpio set val(gpio, 0);
}
gpio_free(gpio);
we can give generalized function inside i2c framework for this, so that multiple
drivers can use it.
Secondly there are drivers/devices where control of pins is available. For them
we can provide driver hooks.
I would try to provide a patch for this ASAP. Other suggestions are welcome.
--
viresh
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
