On Monday 02 April 2012, Roland Stigge wrote:
> --- /dev/null
> +++ linux-2.6/Documentation/devicetree/bindings/i2c/pnx.txt
> @@ -0,0 +1,36 @@
> +* NXP PNX I2C Controller
> +
> +Required properties:
> +
> + - reg: Offset and length of the register set for the device
> + - compatible: should be "nxp,pnx-i2c"
> + - interrupts: <a b> where a is the interrupt number and b is a
> + field that represents an encoding of the sense and level
> + information for the interrupt
The encoding of the interrupt is specific to the controller and does
not belong here. Just write that there is one interrupt line to be
configure.
> + - interrupt-parent: the phandle for the interrupt controller that
> + services interrupts for this device.
interrupt-parent should be optional, it can be set in the (grand-)parent
device on systems where all devices use the same controller.
You should also require
#address-cells = <1>;
#size-cells = <0>;
To create an address space for i2c slave device numbers.
> +Examples:
> +
> + i2c1: i2c@400A0000 {
> + compatible = "nxp,pnx-i2c";
> + reg = <0x400A0000 0x100>;
> + interrupt-parent = <&mic>;
> + interrupts = <51 0>;
> + };
> +
> + i2c2: i2c@400A8000 {
> + compatible = "nxp,pnx-i2c";
> + reg = <0x400A8000 0x100>;
Best use all lowercase letters in the addresses.
> + interrupt-parent = <&mic>;
> + interrupts = <50 0>;
> + clock-frequency = <0x186a0>;
> + pnx,timeout = <0x64>;
> + slave-addr = <0x11>;
> + };
> static struct platform_driver i2c_pnx_driver = {
> .driver = {
> .name = "pnx-i2c",
> .owner = THIS_MODULE,
> +#ifdef CONFIG_OF
> + .of_match_table = i2c_pnx_of_match,
> +#endif
> },
> .probe = i2c_pnx_probe,
> .remove = __devexit_p(i2c_pnx_remove),
of_match_ptr() instead of this #ifdef, please.
Arnd
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
