When entering deep sleep, the value in the registers I2CFDR and
I2CDFSRR are lost. This causes I2C access to fail after resuming.

Add suspend/resume routines to save/restore the registers
I2CFDR and I2CDFSRR.

Signed-off-by: Zhao Chenhui <[email protected]>
Signed-off-by: Li Yang <[email protected]>
---
 drivers/i2c/busses/i2c-mpc.c |   30 ++++++++++++++++++++++++++++++
 1 files changed, 30 insertions(+), 0 deletions(-)

diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index a8ebb84..fb2627b 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -64,6 +64,9 @@ struct mpc_i2c {
        struct i2c_adapter adap;
        int irq;
        u32 real_clk;
+#ifdef CONFIG_PM
+       u8 fdr, dfsrr;
+#endif
 };
 
 struct mpc_i2c_divider {
@@ -668,6 +671,30 @@ static int __devexit fsl_i2c_remove(struct platform_device 
*op)
        return 0;
 };
 
+#ifdef CONFIG_PM
+static int mpc_i2c_suspend(struct device *dev)
+{
+       struct mpc_i2c *i2c = dev_get_drvdata(dev);
+
+       i2c->fdr = readb(i2c->base + MPC_I2C_FDR);
+       i2c->dfsrr = readb(i2c->base + MPC_I2C_DFSRR);
+
+       return 0;
+}
+
+static int mpc_i2c_resume(struct device *dev)
+{
+       struct mpc_i2c *i2c = dev_get_drvdata(dev);
+
+       writeb(i2c->fdr, i2c->base + MPC_I2C_FDR);
+       writeb(i2c->dfsrr, i2c->base + MPC_I2C_DFSRR);
+
+       return 0;
+}
+
+SIMPLE_DEV_PM_OPS(mpc_i2c_pm_ops, mpc_i2c_suspend, mpc_i2c_resume);
+#endif
+
 static struct mpc_i2c_data mpc_i2c_data_512x __devinitdata = {
        .setup = mpc_i2c_setup_512x,
 };
@@ -712,6 +739,9 @@ static struct platform_driver mpc_i2c_driver = {
                .owner = THIS_MODULE,
                .name = DRV_NAME,
                .of_match_table = mpc_i2c_of_match,
+#ifdef CONFIG_PM
+               .pm = &mpc_i2c_pm_ops,
+#endif
        },
 };
 
-- 
1.6.4.1


--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to