Hi Marek, you forgot the most important list, linux-i2c ;)
> I recently tried mxs-i2c (on 3.4-rc4) with at24 eeprom, didn't work as > expected. Yes, we had the same this week/last week. > Apparently, there might be some timing issue, when I put printk() into the > at24 > driver eeprom write function, it "fixed" itself. Though, replacing the i2c > driver with i2c gpio also fixed the issue, so I suspect the i2c driver has > some > flaw in it. Try removing the printk and use the module paramter "io_limit=24" for at24. Does this help? (Or bs<=24 with dd) > If noone has any fixes already, I'll debug this tonight or so. The write FIFO overflows, since it only can carry 8 words. There is currently no check for that. One solution would be to check the FIFO status and fill them as needed. This will probably require additional locking, so I think the proper solution would be to use DMA for transfers bigger than the write FIFO size (we would get MX23 support then, too). Sadly, we don't have DMA support yet and I don't have time to implement it. I am thinking if such transfers which would fail anyway, should currently be rejected or if the driver should depend on BROKEN or both. I am still undecided, though. Please also check the patch I sent yesterday, there is also another one coming after I get confirmation from a customer. Regards, Wolfram -- Pengutronix e.K. | Wolfram Sang | Industrial Linux Solutions | http://www.pengutronix.de/ |
signature.asc
Description: Digital signature
