On Sat, May 12, 2012 at 04:56:48PM +0200, Wolfram Sang wrote:
> On Tue, May 08, 2012 at 06:55:29PM +0530, Jayachandran C wrote:
> > From: Ganesan Ramalingam <[email protected]>
> >
> > Some architectures supports only 16-bit or 32-bit read/write access
> > to their iospace. Add a 'regwidth' platform and OF parameter which
> > specifies the IO width to support these platforms.
> >
> > regwidth can be specified as 1, 2 or 4, and has a default value
> > of 1 if it is unspecified.
> >
> > Signed-off-by: Ganesan Ramalingam <[email protected]>
> > Signed-off-by: Jayachandran C <[email protected]>
>
> Hmm, this is a generic issue and should not be handled with a driver
> specific property. CCing devicetree-discuss, maybe there is already a
> way to handle this? The already existing 'regstep' looks suspicious, too?
> Can't find any documentation for it.
My suggestion would be to use "reg-shift" and "reg-io-width" like the
uart and some other devices. I am not sure why "regstep" was used when
there is already a standard "reg-shift" parameter.
We will post an updated patch that deprecates "regstep" and uses "reg-shift"
and "reg-io-width" if that is preferred.
Thanks,
JC.
>
> > ---
> > drivers/i2c/busses/i2c-ocores.c | 32 ++++++++++++++++++++++++++++++--
> > include/linux/i2c-ocores.h | 1 +
> > 2 files changed, 31 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/i2c/busses/i2c-ocores.c
> > b/drivers/i2c/busses/i2c-ocores.c
> > index ebd2700..1313145 100644
> > --- a/drivers/i2c/busses/i2c-ocores.c
> > +++ b/drivers/i2c/busses/i2c-ocores.c
> > @@ -19,6 +19,9 @@
> > * - regstep : size of device registers in bytes
> > * - clock-frequency : frequency of bus clock in Hz
> > *
> > + * Optional properties:
> > + * - regwidth : io register width in bytes (1, 2 or 4)
> > +
> > * Example:
> > *
> > * i2c0: ocores@a0000000 {
> > @@ -27,6 +30,7 @@
> > * interrupts = <10>;
> > *
> > * regstep = <1>;
> > + * regwidth = <1>;
> > * clock-frequency = <20000000>;
> > *
> > * -- Devices connected on this I2C bus get
> > @@ -60,6 +64,7 @@
> > struct ocores_i2c {
> > void __iomem *base;
> > int regstep;
> > + int regwidth;
> > wait_queue_head_t wait;
> > struct i2c_adapter adap;
> > struct i2c_msg *msg;
> > @@ -102,12 +107,22 @@ struct ocores_i2c {
> >
> > static inline void oc_setreg(struct ocores_i2c *i2c, int reg, u8 value)
> > {
> > - iowrite8(value, i2c->base + reg * i2c->regstep);
> > + if (i2c->regwidth == 4)
> > + iowrite32(value, i2c->base + reg * i2c->regstep);
> > + else if (i2c->regwidth == 2)
> > + iowrite16(value, i2c->base + reg * i2c->regstep);
> > + else
> > + iowrite8(value, i2c->base + reg * i2c->regstep);
> > }
> >
> > static inline u8 oc_getreg(struct ocores_i2c *i2c, int reg)
> > {
> > - return ioread8(i2c->base + reg * i2c->regstep);
> > + if (i2c->regwidth == 4)
> > + return ioread32(i2c->base + reg * i2c->regstep);
> > + else if (i2c->regwidth == 2)
> > + return ioread16(i2c->base + reg * i2c->regstep);
> > + else
> > + return ioread8(i2c->base + reg * i2c->regstep);
> > }
> >
> > static void ocores_process(struct ocores_i2c *i2c)
> > @@ -267,6 +282,10 @@ static int ocores_i2c_of_probe(struct platform_device*
> > pdev,
> > }
> > i2c->clock_khz = be32_to_cpup(val) / 1000;
> >
> > + val = of_get_property(pdev->dev.of_node, "regwidth", NULL);
> > + if (val)
> > + i2c->regwidth = be32_to_cpup(val);
> > +
> > return 0;
> > }
> > #else
> > @@ -309,12 +328,21 @@ static int __devinit ocores_i2c_probe(struct
> > platform_device *pdev)
> > pdata = pdev->dev.platform_data;
> > if (pdata) {
> > i2c->regstep = pdata->regstep;
> > + i2c->regwidth = pdata->regwidth;
> > i2c->clock_khz = pdata->clock_khz;
> > } else {
> > ret = ocores_i2c_of_probe(pdev, i2c);
> > if (ret)
> > return ret;
> > }
> > + if (i2c->regwidth == 0)
> > + i2c->regwidth = 1; /* not configured, use default */
> > + else if (i2c->regwidth != 1 && i2c->regwidth != 2 &&
> > + i2c->regwidth != 4) {
> > + dev_err(&pdev->dev, "Invalid register width %d\n",
> > + i2c->regwidth);
> > + return -EINVAL;
> > + }
> >
> > ocores_init(i2c);
> >
> > diff --git a/include/linux/i2c-ocores.h b/include/linux/i2c-ocores.h
> > index 4d5e57f..d1258ad 100644
> > --- a/include/linux/i2c-ocores.h
> > +++ b/include/linux/i2c-ocores.h
> > @@ -13,6 +13,7 @@
> >
> > struct ocores_i2c_platform_data {
> > u32 regstep; /* distance between registers */
> > + u32 regwidth; /* io read/write register witdth */
> > u32 clock_khz; /* input clock in kHz */
> > u8 num_devices; /* number of devices in the devices list */
> > struct i2c_board_info const *devices; /* devices connected to the bus */
> > --
> > 1.7.9.5
> >
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
> > the body of a message to [email protected]
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
>
> --
> Pengutronix e.K. | Wolfram Sang |
> Industrial Linux Solutions | http://www.pengutronix.de/ |
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
