This codes connects the CI13xxx driver with the core found inside of
the Freescale i.MX244/i.MX28 CPU.

Signed-off-by: Marek Vasut <[email protected]>
Cc: Alan Stern <[email protected]>
Cc: Detlev Zundel <[email protected]>
CC: Dong Aisheng <[email protected]>
CC: Fabio Estevam <[email protected]>
Cc: Felipe Balbi <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Linux ARM kernel <[email protected]>
Cc: [email protected]
CC: Sascha Hauer <[email protected]>
CC: Shawn Guo <[email protected]>
Cc: Stefano Babic <[email protected]>
CC: Uwe Kleine-König <[email protected]>
Cc: Wolfgang Denk <[email protected]>
Cc: Wolfram Sang <[email protected]>
---
 drivers/usb/chipidea/Makefile      |    4 +
 drivers/usb/chipidea/ci13xxx_mxs.c |  201 ++++++++++++++++++++++++++++++++++++
 2 files changed, 205 insertions(+)
 create mode 100644 drivers/usb/chipidea/ci13xxx_mxs.c

diff --git a/drivers/usb/chipidea/Makefile b/drivers/usb/chipidea/Makefile
index cc34937..266d57d 100644
--- a/drivers/usb/chipidea/Makefile
+++ b/drivers/usb/chipidea/Makefile
@@ -12,3 +12,7 @@ endif
 ifneq ($(CONFIG_ARCH_MSM),)
        obj-$(CONFIG_USB_CHIPIDEA)      += ci13xxx_msm.o
 endif
+
+ifneq ($(CONFIG_ARCH_MXS),)
+       obj-$(CONFIG_USB_CHIPIDEA)      += ci13xxx_mxs.o
+endif
diff --git a/drivers/usb/chipidea/ci13xxx_mxs.c 
b/drivers/usb/chipidea/ci13xxx_mxs.c
new file mode 100644
index 0000000..fcca90b
--- /dev/null
+++ b/drivers/usb/chipidea/ci13xxx_mxs.c
@@ -0,0 +1,201 @@
+/*
+ * drivers/usb/chipidea/ci13xxx_mxs.c
+ *
+ * Freescale i.MX233/i.MX28 USB glue driver to CI13xxx core.
+ *
+ * Copyright (C) 2012 Marek Vasut <[email protected]>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+
+#include <linux/usb.h>
+#include <linux/usb/chipidea.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/hcd.h>
+#include <linux/usb/ehci_def.h>
+
+#include <linux/usb/mxs-usb.h>
+
+#include "ci.h"
+
+static void ci13xxx_mxs_notify(struct ci13xxx *ci, unsigned event)
+{
+       uint32_t status;
+       struct usb_phy *phy;
+       struct mxs_ci13xxx_phy_notify notify;
+
+       phy = usb_get_transceiver();
+       if (!phy)
+               return;
+
+       if (event != CI13XXX_CONTROLLER_HOST_IRQ_EVENT)
+               return;
+
+       status = hw_read(ci, OP_USBSTS, ~0);
+
+       notify.discon = status & STS_PCD;
+
+       usb_phy_notify(phy, &notify);
+}
+
+static struct ci13xxx_udc_driver ci13xxx_mxs_udc_driver = {
+       .name                   = "ci13xxx_mxs",
+       .flags                  = /*CI13XXX_REGS_SHARED |*/
+                                 CI13XXX_REQUIRE_TRANSCEIVER |
+                                 CI13XXX_PULLUP_ON_VBUS |
+                                 CI13XXX_DISABLE_STREAMING,
+       .capoffset              = 0x100,
+       .notify_event           = ci13xxx_mxs_notify,
+};
+
+struct ci13xxx_mxs_data {
+       struct clk              *clk;
+       struct platform_device  *pdev;
+};
+
+static int __devinit ci13xxx_mxs_probe(struct platform_device *pdev)
+{
+       struct ci13xxx_mxs_data *data;
+       int ret;
+       struct usb_phy *phy;
+
+       phy = usb_get_transceiver();
+       if (!phy)
+               return -EPROBE_DEFER;
+
+       data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+       if (!data) {
+               dev_err(&pdev->dev, "Failed to allocate CI13xxx-MXS data!\n");
+               return -ENOMEM;
+       }
+
+       ret = usb_phy_init(phy);
+       if (ret) {
+               dev_err(&pdev->dev, "Failed to initialize PHY!\n");
+               return -EINVAL;
+       }
+
+       data->pdev = platform_device_alloc("ci_hdrc", -1);
+       if (!data->pdev) {
+               dev_err(&pdev->dev,
+                       "Failed to allocate ci_hdrc platform device!\n");
+               ret = -ENOMEM;
+               goto put_phy;
+       }
+
+       /* Add DMA mask */
+       data->pdev->dev.dma_mask = devm_kzalloc(&pdev->dev,
+                                       sizeof(*data->pdev->dev.dma_mask),
+                                       GFP_KERNEL);
+       if (!data->pdev->dev.dma_mask) {
+               ret = -ENOMEM;
+               goto put_platform;
+       }
+
+       *data->pdev->dev.dma_mask = DMA_BIT_MASK(32);
+       data->pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+
+       ret = platform_device_add_resources(data->pdev, pdev->resource,
+                                           pdev->num_resources);
+       if (ret) {
+               dev_err(&pdev->dev,
+                       "Failed to add resources to platform device!\n");
+               goto put_platform;
+       }
+
+       ret = platform_device_add_data(data->pdev, &ci13xxx_mxs_udc_driver,
+                                      sizeof(ci13xxx_mxs_udc_driver));
+       if (ret) {
+               dev_err(&pdev->dev,
+                       "Failed to add platform data to platform device!\n");
+               goto put_platform;
+       }
+
+       /* Claim the Host clock. */
+       data->clk = clk_get(&pdev->dev, "usb");
+       if (IS_ERR(data->clk)) {
+               dev_err(&pdev->dev, "Failed to claim clock for USB Host\n");
+               ret = PTR_ERR(data->clk);
+               goto put_platform;
+       }
+
+       /* Prepare Host clock. */
+       ret = clk_prepare_enable(data->clk);
+       if (ret) {
+               dev_err(&pdev->dev, "Failed to enable clock for USB Host.\n");
+               goto put_clk;
+       }
+
+       ret = platform_device_add(data->pdev);
+       if (ret)
+               goto put_clk;
+
+       dev_set_drvdata(&pdev->dev, data);
+
+       pm_runtime_no_callbacks(&pdev->dev);
+       pm_runtime_enable(&pdev->dev);
+
+       return 0;
+
+put_clk:
+       clk_put(data->clk);
+put_platform:
+       platform_device_put(data->pdev);
+put_phy:
+       usb_phy_shutdown(phy);
+       return ret;
+}
+
+static int __devexit ci13xxx_mxs_remove(struct platform_device *pdev)
+{
+       struct ci13xxx_mxs_data *data = dev_get_drvdata(&pdev->dev);
+       struct usb_phy *phy = usb_get_transceiver();
+
+       clk_disable_unprepare(data->clk);
+       clk_put(data->clk);
+
+       if (phy)
+               usb_phy_shutdown(phy);
+
+       platform_device_del(data->pdev);
+       platform_device_put(data->pdev);
+
+       return 0;
+}
+
+static struct platform_driver ci13xxx_mxs_driver = {
+       .probe          = ci13xxx_mxs_probe,
+       .remove         = __devexit_p(ci13xxx_mxs_remove),
+       .driver         = {
+               .name   = "mxs-usb",
+               .owner  = THIS_MODULE,
+       },
+};
+
+module_platform_driver(ci13xxx_mxs_driver);
+
+MODULE_ALIAS("platform:mxs-usb");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("CI13xxx MXS USB binding");
+MODULE_AUTHOR("Marek Vasut <[email protected]>");
-- 
1.7.10

--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to