This patch implements DMA support into mxs-i2c. DMA transfers are now enabled via DT. The DMA operation is enabled by default.
Signed-off-by: Marek Vasut <[email protected]> Cc: Detlev Zundel <[email protected]> CC: Dong Aisheng <[email protected]> CC: Fabio Estevam <[email protected]> Cc: Linux ARM kernel <[email protected]> Cc: [email protected] CC: Sascha Hauer <[email protected]> CC: Shawn Guo <[email protected]> Cc: Stefano Babic <[email protected]> CC: Uwe Kleine-König <[email protected]> Cc: Wolfgang Denk <[email protected]> Cc: Wolfram Sang <[email protected]> --- Documentation/devicetree/bindings/i2c/i2c-mxs.txt | 4 + arch/arm/boot/dts/imx28.dtsi | 2 + drivers/i2c/busses/i2c-mxs.c | 268 +++++++++++++++++++-- 3 files changed, 252 insertions(+), 22 deletions(-) V2: Improve documentation diff --git a/Documentation/devicetree/bindings/i2c/i2c-mxs.txt b/Documentation/devicetree/bindings/i2c/i2c-mxs.txt index d2bf750..9497ee0 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mxs.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-mxs.txt @@ -5,6 +5,10 @@ Required properties: - reg: Should contain registers location and length - interrupts: Should contain ERROR and DMA interrupts - clock-frequency: desired I2C bus clock frequency in Hz. +- fsl,i2c-dma-channel: APBX DMA channel for the I2C + +Optional properties: +- fsl,use-pio: Use PIO transfers instead of DMA, useful for debug Examples: diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 714e63c..cabcce8 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -399,6 +399,7 @@ reg = <0x80058000 2000>; interrupts = <111 68>; clock-frequency = <400000>; + fsl,i2c-dma-channel = <6>; status = "disabled"; }; @@ -409,6 +410,7 @@ reg = <0x8005a000 2000>; interrupts = <110 69>; clock-frequency = <400000>; + fsl,i2c-dma-channel = <7>; status = "disabled"; }; diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c index b4d083f..c8e4184 100644 --- a/drivers/i2c/busses/i2c-mxs.c +++ b/drivers/i2c/busses/i2c-mxs.c @@ -7,8 +7,6 @@ * * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved. * - * TODO: add dma-support if platform-support for it is available - * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or @@ -31,6 +29,9 @@ #include <linux/of.h> #include <linux/of_device.h> #include <linux/of_i2c.h> +#include <linux/dma-mapping.h> +#include <linux/dmaengine.h> +#include <linux/fsl/mxs-dma.h> #define DRIVER_NAME "mxs-i2c" @@ -135,6 +136,16 @@ struct mxs_i2c_dev { u32 cmd_err; struct i2c_adapter adapter; const struct mxs_i2c_speed_config *speed; + + /* DMA support components */ + bool dma_mode; + int dma_channel; + struct dma_chan *dmach; + struct mxs_dma_data dma_data; + uint32_t pio_data[2]; + uint32_t addr_data; + struct scatterlist sg_io[2]; + bool dma_read; }; static void mxs_i2c_reset(struct mxs_i2c_dev *i2c) @@ -146,7 +157,11 @@ static void mxs_i2c_reset(struct mxs_i2c_dev *i2c) writel(i2c->speed->timing2, i2c->regs + MXS_I2C_TIMING2); writel(MXS_I2C_IRQ_MASK << 8, i2c->regs + MXS_I2C_CTRL1_SET); - writel(MXS_I2C_QUEUECTRL_PIO_QUEUE_MODE, + if (i2c->dma_mode) + writel(MXS_I2C_QUEUECTRL_PIO_QUEUE_MODE, + i2c->regs + MXS_I2C_QUEUECTRL_CLR); + else + writel(MXS_I2C_QUEUECTRL_PIO_QUEUE_MODE, i2c->regs + MXS_I2C_QUEUECTRL_SET); } @@ -237,6 +252,151 @@ static int mxs_i2c_finish_read(struct mxs_i2c_dev *i2c, u8 *buf, int len) return 0; } +static void mxs_i2c_dma_finish(struct mxs_i2c_dev *i2c) +{ + if (i2c->dma_read) { + dma_unmap_sg(i2c->dev, &i2c->sg_io[0], 1, DMA_TO_DEVICE); + dma_unmap_sg(i2c->dev, &i2c->sg_io[1], 1, DMA_FROM_DEVICE); + } else { + dma_unmap_sg(i2c->dev, i2c->sg_io, 2, DMA_TO_DEVICE); + } +} + +static void mxs_i2c_dma_irq_callback(void *param) +{ + struct mxs_i2c_dev *i2c = param; + + complete(&i2c->cmd_complete); + mxs_i2c_dma_finish(i2c); +} + +static int mxs_i2c_dma_setup_xfer(struct i2c_adapter *adap, + struct i2c_msg *msg, uint32_t flags) +{ + struct dma_async_tx_descriptor *desc; + struct mxs_i2c_dev *i2c = i2c_get_adapdata(adap); + + if (msg->flags & I2C_M_RD) { + i2c->dma_read = 1; + i2c->addr_data = (msg->addr << 1) | I2C_SMBUS_READ; + + /* + * SELECT command. + */ + + /* Queue the PIO register write transfer. */ + i2c->pio_data[0] = MXS_CMD_I2C_SELECT; + desc = dmaengine_prep_slave_sg(i2c->dmach, + (struct scatterlist *)&i2c->pio_data[0], + 1, DMA_TRANS_NONE, 0); + if (!desc) { + dev_err(i2c->dev, + "Failed to get PIO reg. write descriptor.\n"); + goto select_init_pio_fail; + } + + /* Queue the DMA data transfer. */ + sg_init_one(&i2c->sg_io[0], &i2c->addr_data, 1); + dma_map_sg(i2c->dev, &i2c->sg_io[0], 1, DMA_TO_DEVICE); + desc = dmaengine_prep_slave_sg(i2c->dmach, &i2c->sg_io[0], 1, + DMA_MEM_TO_DEV, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!desc) { + dev_err(i2c->dev, + "Failed to get DMA data write descriptor.\n"); + goto select_init_dma_fail; + } + + /* + * READ command. + */ + + /* Queue the PIO register write transfer. */ + i2c->pio_data[1] = flags | MXS_CMD_I2C_READ | + MXS_I2C_CTRL0_XFER_COUNT(msg->len); + desc = dmaengine_prep_slave_sg(i2c->dmach, + (struct scatterlist *)&i2c->pio_data[1], + 1, DMA_TRANS_NONE, DMA_PREP_INTERRUPT); + if (!desc) { + dev_err(i2c->dev, + "Failed to get PIO reg. write descriptor.\n"); + goto select_init_dma_fail; + } + + /* Queue the DMA data transfer. */ + sg_init_one(&i2c->sg_io[1], msg->buf, msg->len); + dma_map_sg(i2c->dev, &i2c->sg_io[1], 1, DMA_FROM_DEVICE); + desc = dmaengine_prep_slave_sg(i2c->dmach, &i2c->sg_io[1], 1, + DMA_DEV_TO_MEM, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!desc) { + dev_err(i2c->dev, + "Failed to get DMA data write descriptor.\n"); + goto read_init_dma_fail; + } + } else { + i2c->dma_read = 0; + i2c->addr_data = (msg->addr << 1) | I2C_SMBUS_WRITE; + + /* + * WRITE command. + */ + + /* Queue the PIO register write transfer. */ + i2c->pio_data[0] = flags | MXS_CMD_I2C_WRITE | + MXS_I2C_CTRL0_XFER_COUNT(msg->len + 1); + desc = dmaengine_prep_slave_sg(i2c->dmach, + (struct scatterlist *)&i2c->pio_data[0], + 1, DMA_TRANS_NONE, 0); + if (!desc) { + dev_err(i2c->dev, + "Failed to get PIO reg. write descriptor.\n"); + goto write_init_pio_fail; + } + + /* Queue the DMA data transfer. */ + sg_init_table(i2c->sg_io, 2); + sg_set_buf(&i2c->sg_io[0], &i2c->addr_data, 1); + sg_set_buf(&i2c->sg_io[1], msg->buf, msg->len); + dma_map_sg(i2c->dev, i2c->sg_io, 2, DMA_TO_DEVICE); + desc = dmaengine_prep_slave_sg(i2c->dmach, i2c->sg_io, 2, + DMA_MEM_TO_DEV, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!desc) { + dev_err(i2c->dev, + "Failed to get DMA data write descriptor.\n"); + goto write_init_dma_fail; + } + } + + /* + * The last descriptor must have this callback, + * to finish the DMA transaction. + */ + desc->callback = mxs_i2c_dma_irq_callback; + desc->callback_param = i2c; + + /* Start the transfer. */ + dmaengine_submit(desc); + dma_async_issue_pending(i2c->dmach); + return 0; + +/* Read failpath. */ +read_init_dma_fail: + dma_unmap_sg(i2c->dev, &i2c->sg_io[1], 1, DMA_FROM_DEVICE); +select_init_dma_fail: + dma_unmap_sg(i2c->dev, &i2c->sg_io[0], 1, DMA_TO_DEVICE); +select_init_pio_fail: + return 1; + + +/* Write failpath. */ +write_init_dma_fail: + dma_unmap_sg(i2c->dev, i2c->sg_io, 2, DMA_TO_DEVICE); +write_init_pio_fail: + return 1; +} + /* * Low level master read/write transaction. */ @@ -247,6 +407,8 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int ret; int flags; + flags = stop ? MXS_I2C_CTRL0_POST_SEND_STOP : 0; + dev_dbg(i2c->dev, "addr: 0x%04x, len: %d, flags: 0x%x, stop: %d\n", msg->addr, msg->len, msg->flags, stop); @@ -256,23 +418,29 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, init_completion(&i2c->cmd_complete); i2c->cmd_err = 0; - flags = stop ? MXS_I2C_CTRL0_POST_SEND_STOP : 0; - - if (msg->flags & I2C_M_RD) - mxs_i2c_pioq_setup_read(i2c, msg->addr, msg->len, flags); - else - mxs_i2c_pioq_setup_write(i2c, msg->addr, msg->buf, msg->len, - flags); + if (i2c->dma_mode) { + ret = mxs_i2c_dma_setup_xfer(adap, msg, flags); + if (ret) + return -EINVAL; + } else { + if (msg->flags & I2C_M_RD) { + mxs_i2c_pioq_setup_read(i2c, msg->addr, + msg->len, flags); + } else { + mxs_i2c_pioq_setup_write(i2c, msg->addr, msg->buf, + msg->len, flags); + } - writel(MXS_I2C_QUEUECTRL_QUEUE_RUN, + writel(MXS_I2C_QUEUECTRL_QUEUE_RUN, i2c->regs + MXS_I2C_QUEUECTRL_SET); + } ret = wait_for_completion_timeout(&i2c->cmd_complete, msecs_to_jiffies(1000)); if (ret == 0) goto timeout; - if ((!i2c->cmd_err) && (msg->flags & I2C_M_RD)) { + if (!i2c->dma_mode && !i2c->cmd_err && (msg->flags & I2C_M_RD)) { ret = mxs_i2c_finish_read(i2c, msg->buf, msg->len); if (ret) goto timeout; @@ -290,6 +458,7 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, timeout: dev_dbg(i2c->dev, "Timeout!\n"); + mxs_i2c_dma_finish(i2c); mxs_i2c_reset(i2c); return -ETIMEDOUT; } @@ -331,11 +500,13 @@ static irqreturn_t mxs_i2c_isr(int this_irq, void *dev_id) /* MXS_I2C_CTRL1_OVERSIZE_XFER_TERM_IRQ is only for slaves */ i2c->cmd_err = -EIO; - is_last_cmd = (readl(i2c->regs + MXS_I2C_QUEUESTAT) & - MXS_I2C_QUEUESTAT_WRITE_QUEUE_CNT_MASK) == 0; + if (!i2c->dma_mode) { + is_last_cmd = (readl(i2c->regs + MXS_I2C_QUEUESTAT) & + MXS_I2C_QUEUESTAT_WRITE_QUEUE_CNT_MASK) == 0; - if (is_last_cmd || i2c->cmd_err) - complete(&i2c->cmd_complete); + if (is_last_cmd || i2c->cmd_err) + complete(&i2c->cmd_complete); + } writel(stat, i2c->regs + MXS_I2C_CTRL1_CLR); @@ -347,15 +518,53 @@ static const struct i2c_algorithm mxs_i2c_algo = { .functionality = mxs_i2c_func, }; +static bool mxs_i2c_dma_filter(struct dma_chan *chan, void *param) +{ + struct mxs_i2c_dev *i2c = param; + + if (!mxs_dma_is_apbx(chan)) + return false; + + if (chan->chan_id != i2c->dma_channel) + return false; + + chan->private = &i2c->dma_data; + + return true; +} + static int mxs_i2c_get_ofdata(struct mxs_i2c_dev *i2c) { uint32_t speed; struct device *dev = i2c->dev; struct device_node *node = dev->of_node; + int ret; if (!node) return -EINVAL; + /* + * The MXS I2C DMA mode is prefered and enabled by default. + * The PIO mode is still supported, but should be used only + * for debuging purposes etc. + */ + i2c->dma_mode = 1; + if (of_find_property(node, "fsl,use-pio", NULL)) { + i2c->dma_mode = 0; + dev_info(dev, "Using PIO mode for I2C transfers!\n"); + } + + /* + * TODO: This is a temporary solution and should be changed + * to use generic DMA binding later when the helpers get in. + */ + ret = of_property_read_u32(node, "fsl,i2c-dma-channel", + &i2c->dma_channel); + if (ret) { + dev_warn(dev, "Failed to get DMA channel!\n"); + i2c->dma_mode = 0; + } + i2c->speed = &mxs_i2c_95kHz_config; ret = of_property_read_u32(node, "clock-frequency", &speed); if (ret) @@ -376,7 +585,8 @@ static int __devinit mxs_i2c_probe(struct platform_device *pdev) struct pinctrl *pinctrl; struct resource *res; resource_size_t res_size; - int err, irq; + int err, irq, dmairq; + dma_cap_mask_t mask; pinctrl = devm_pinctrl_get_select_default(dev); if (IS_ERR(pinctrl)) @@ -387,7 +597,10 @@ static int __devinit mxs_i2c_probe(struct platform_device *pdev) return -ENOMEM; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) + irq = platform_get_irq(pdev, 0); + dmairq = platform_get_irq(pdev, 1); + + if (!res || irq < 0 || dmairq < 0) return -ENOENT; res_size = resource_size(res); @@ -398,10 +611,6 @@ static int __devinit mxs_i2c_probe(struct platform_device *pdev) if (!i2c->regs) return -EBUSY; - irq = platform_get_irq(pdev, 0); - if (irq < 0) - return irq; - err = devm_request_irq(dev, irq, mxs_i2c_isr, 0, dev_name(dev), i2c); if (err) return err; @@ -412,6 +621,18 @@ static int __devinit mxs_i2c_probe(struct platform_device *pdev) if (err) return err; + /* Setup the DMA */ + if (i2c->dma_mode) { + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + i2c->dma_data.chan_irq = dmairq; + i2c->dmach = dma_request_channel(mask, mxs_i2c_dma_filter, i2c); + if (!i2c->dmach) { + dev_err(dev, "Failed to request dma\n"); + return -ENODEV; + } + } + platform_set_drvdata(pdev, i2c); /* Do reset to enforce correct startup after pinmuxing */ @@ -447,6 +668,9 @@ static int __devexit mxs_i2c_remove(struct platform_device *pdev) if (ret) return -EBUSY; + if (i2c->dmach) + dma_release_channel(i2c->dmach); + writel(MXS_I2C_CTRL0_SFTRST, i2c->regs + MXS_I2C_CTRL0_SET); platform_set_drvdata(pdev, NULL); -- 1.7.10 -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
