On Wed, May 16, 2012 at 03:20:21PM +0800, [email protected] wrote:
> From: Sonic Zhang <[email protected]>
> 
> Some fault i2c device may hold the sda/scl line and cause i2c driver
> wait in the BUS busy loop. This patch breaks this potential dead
> loop.
> 
> Signed-off-by: Sonic Zhang <[email protected]>
> 
> git-svn-id: svn://localhost/svn/linux-kernel/trunk@9291 
> 526b6c2d-f592-4532-a319-5dd88ccb003d

^

> ---
>  drivers/i2c/busses/i2c-bfin-twi.c |   14 ++++++++++++--
>  1 files changed, 12 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-bfin-twi.c 
> b/drivers/i2c/busses/i2c-bfin-twi.c
> index 376e331..4abaf59 100644
> --- a/drivers/i2c/busses/i2c-bfin-twi.c
> +++ b/drivers/i2c/busses/i2c-bfin-twi.c
> @@ -294,6 +294,8 @@ static irqreturn_t bfin_twi_interrupt_entry(int irq, void 
> *dev_id)
>       return IRQ_HANDLED;
>  }
>  
> +#define BFIN_TWI_BUSY_TIMEOUT        1000
> +

Please use a unit like microseconds for the timeout.

>  /*
>   * One i2c master transfer
>   */
> @@ -303,12 +305,16 @@ static int bfin_twi_do_master_xfer(struct i2c_adapter 
> *adap,
>       struct bfin_twi_iface *iface = adap->algo_data;
>       struct i2c_msg *pmsg;
>       int rc = 0;
> +     unsigned int busy_timeout = BFIN_TWI_BUSY_TIMEOUT;
>  
>       if (!(read_CONTROL(iface) & TWI_ENA))
>               return -ENXIO;
>  
> -     while (read_MASTER_STAT(iface) & BUSBUSY)
> +     while (read_MASTER_STAT(iface) & BUSBUSY) {
> +             if (--busy_timeout == 0)
> +                     return -EBUSY;
>               yield();
> +     }
>  
>       iface->pmsg = msgs;
>       iface->msg_num = num;
> @@ -403,12 +409,16 @@ int bfin_twi_do_smbus_xfer(struct i2c_adapter *adap, 
> u16 addr,
>  {
>       struct bfin_twi_iface *iface = adap->algo_data;
>       int rc = 0;
> +     unsigned int busy_timeout = BFIN_TWI_BUSY_TIMEOUT;
>  
>       if (!(read_CONTROL(iface) & TWI_ENA))
>               return -ENXIO;
>  
> -     while (read_MASTER_STAT(iface) & BUSBUSY)
> +     while (read_MASTER_STAT(iface) & BUSBUSY) {
> +             if (--busy_timeout == 0)
> +                     return -EBUSY;
>               yield();
> +     }
>  
>       iface->writeNum = 0;
>       iface->readNum = 0;
> -- 
> 1.7.0.4
> 
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
> the body of a message to [email protected]
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

-- 
Pengutronix e.K.                           | Wolfram Sang                |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |

Attachment: signature.asc
Description: Digital signature

Reply via email to