A small code saving and less error handling to worry about.

Signed-off-by: Mark Brown <[email protected]>
---
 drivers/i2c/busses/i2c-s3c2410.c |   35 +++++++----------------------------
 1 file changed, 7 insertions(+), 28 deletions(-)

diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 7fe8c73..ddd5797 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -78,7 +78,6 @@ struct s3c24xx_i2c {
        void __iomem            *regs;
        struct clk              *clk;
        struct device           *dev;
-       struct resource         *ioarea;
        struct i2c_adapter      adap;
 
        struct s3c2410_platform_i2c     *pdata;
@@ -988,25 +987,16 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
                goto err_clk;
        }
 
-       i2c->ioarea = request_mem_region(res->start, resource_size(res),
-                                        pdev->name);
-
-       if (i2c->ioarea == NULL) {
-               dev_err(&pdev->dev, "cannot request IO\n");
-               ret = -ENXIO;
-               goto err_clk;
-       }
-
-       i2c->regs = ioremap(res->start, resource_size(res));
+       i2c->regs = devm_request_and_ioremap(&pdev->dev, res);
 
        if (i2c->regs == NULL) {
                dev_err(&pdev->dev, "cannot map IO\n");
                ret = -ENXIO;
-               goto err_ioarea;
+               goto err_clk;
        }
 
-       dev_dbg(&pdev->dev, "registers %p (%p, %p)\n",
-               i2c->regs, i2c->ioarea, res);
+       dev_dbg(&pdev->dev, "registers %p (%p)\n",
+               i2c->regs, res);
 
        /* setup info block for the i2c core */
 
@@ -1017,7 +1007,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
 
        ret = s3c24xx_i2c_init(i2c);
        if (ret != 0)
-               goto err_iomap;
+               goto err_clk;
 
        /* find the IRQ for this unit (note, this relies on the init call to
         * ensure no current IRQs pending
@@ -1026,7 +1016,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
        i2c->irq = ret = platform_get_irq(pdev, 0);
        if (ret <= 0) {
                dev_err(&pdev->dev, "cannot find IRQ\n");
-               goto err_iomap;
+               goto err_clk;
        }
 
        ret = request_irq(i2c->irq, s3c24xx_i2c_irq, 0,
@@ -1034,7 +1024,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
 
        if (ret != 0) {
                dev_err(&pdev->dev, "cannot claim IRQ %d\n", i2c->irq);
-               goto err_iomap;
+               goto err_clk;
        }
 
        ret = s3c24xx_i2c_register_cpufreq(i2c);
@@ -1074,13 +1064,6 @@ static int s3c24xx_i2c_probe(struct platform_device 
*pdev)
  err_irq:
        free_irq(i2c->irq, i2c);
 
- err_iomap:
-       iounmap(i2c->regs);
-
- err_ioarea:
-       release_resource(i2c->ioarea);
-       kfree(i2c->ioarea);
-
  err_clk:
        clk_disable(i2c->clk);
        clk_put(i2c->clk);
@@ -1109,11 +1092,7 @@ static int s3c24xx_i2c_remove(struct platform_device 
*pdev)
        clk_disable(i2c->clk);
        clk_put(i2c->clk);
 
-       iounmap(i2c->regs);
-
-       release_resource(i2c->ioarea);
        s3c24xx_i2c_dt_gpio_free(i2c);
-       kfree(i2c->ioarea);
 
        return 0;
 }
-- 
1.7.10

--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to