On Fri, Jul 06, 2012 at 01:40:39PM -0500, Rob Herring wrote: > From: Rob Herring <[email protected]> > > Instead of using the custom iop3xx gpio functions, use the gpiolib > variants. This should be functionally the same since the gpiolib > just calls the iop3xx gpio functions. This is needed in preparation > of removing iop3xx mach/io.h headers. > > Signed-off-by: Rob Herring <[email protected]> > Cc: "Jean Delvare (PC drivers, core)" <[email protected]> > Cc: "Ben Dooks (embedded platforms)" <[email protected]> > Cc: "Wolfram Sang (embedded platforms)" <[email protected]> > Cc: [email protected]
Is this dependent on another patch from this series? Or can this go
via the I2C tree? I am fine with just acking this one, but the
whitespace removal should better go via I2C I think.
Thanks,
Wolfram
> ---
> drivers/i2c/busses/i2c-iop3xx.c | 9 +++++----
> 1 file changed, 5 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c
> index 567d873..2f99613 100644
> --- a/drivers/i2c/busses/i2c-iop3xx.c
> +++ b/drivers/i2c/busses/i2c-iop3xx.c
> @@ -39,6 +39,7 @@
> #include <linux/platform_device.h>
> #include <linux/i2c.h>
> #include <linux/io.h>
> +#include <linux/gpio.h>
>
> #include "i2c-iop3xx.h"
>
> @@ -78,11 +79,11 @@ iop3xx_i2c_enable(struct i2c_algo_iop3xx_data
> *iop3xx_adap)
> */
> #if defined(CONFIG_ARCH_IOP32X) || defined(CONFIG_ARCH_IOP33X)
> if (iop3xx_adap->id == 0) {
> - gpio_line_set(IOP3XX_GPIO_LINE(7), GPIO_LOW);
> - gpio_line_set(IOP3XX_GPIO_LINE(6), GPIO_LOW);
> + gpio_set_value(7, 0);
> + gpio_set_value(6, 0);
> } else {
> - gpio_line_set(IOP3XX_GPIO_LINE(5), GPIO_LOW);
> - gpio_line_set(IOP3XX_GPIO_LINE(4), GPIO_LOW);
> + gpio_set_value(5, 0);
> + gpio_set_value(4, 0);
> }
> #endif
> /* NB SR bits not same position as CR IE bits :-( */
> --
> 1.7.9.5
>
--
Pengutronix e.K. | Wolfram Sang |
Industrial Linux Solutions | http://www.pengutronix.de/ |
signature.asc
Description: Digital signature
