Hi, On Fri, Jul 20, 2012 at 07:00:57PM +0200, Andrew Lunn wrote: > Extends the driver to get properties from device tree. Rather than > pass the N & M factors in DT, use the more standard clock-frequency > property. Calculate N & M at run time. In order to do this, we need to > know tclk. So the driver uses clk_get() etc in order to get the clock > and clk_get_rate() to determine the tclk rate. Not all platforms > however have CLK, so some #ifdefery is needed to ensure the driver > still compiles when CLK is not available. > > Signed-off-by: Andrew Lunn <[email protected]> > --- > > - Replaced the timeout property in DT, with a hard coded 1 second. > - Put all the OF code together. > - Split the ARM parts from the driver itself. > - Dropped Sebastian Hesselbarth Acked-by, since the changes are not trivial. > - Change MV64XXX to MV64XYZ in the Subject to try to get it past the list > spam filter.
:)
>
> This patch and the ARM counter part patch, plus all the DT changes to
> make us of it can be found in:
>
> git://github.com/lunn/linux.git v3.5-rc7-for-next-v5
>
> This patch is not yet rebased on i2c-embedded/for-next. I will do this
> once there is a general acceptance of this patch.
>
> Documentation/devicetree/bindings/i2c/mrvl-i2c.txt | 19 ++-
> drivers/i2c/busses/i2c-mv64xxx.c | 135
> +++++++++++++++++++-
> 2 files changed, 148 insertions(+), 6 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt
> b/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt
> index b891ee2..0f79450 100644
> --- a/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt
> +++ b/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt
> @@ -1,4 +1,4 @@
> -* I2C
> +* Marvell MMP I2C controller
>
> Required properties :
>
> @@ -32,3 +32,20 @@ Examples:
> interrupts = <58>;
> };
>
> +* Marvell MV64XXX I2C controller
> +
> +Required properties :
> +
> + - reg : Offset and length of the register set for the device
> + - compatible : Should be "marvell,mv64xxx-i2c"
> + - interrupts : The interrupt number
> + - clock-frequency : Desired I2C bus clock frequency in Hz.
> +
> +Examples:
> +
> + i2c@11000 {
> + compatible = "marvell,mv64xxx-i2c";
> + reg = <0x11000 0x20>;
> + interrupts = <29>;
> + clock-frequency = <100000>;
> + };
> diff --git a/drivers/i2c/busses/i2c-mv64xxx.c
> b/drivers/i2c/busses/i2c-mv64xxx.c
> index 4f44a33..e5449be 100644
> --- a/drivers/i2c/busses/i2c-mv64xxx.c
> +++ b/drivers/i2c/busses/i2c-mv64xxx.c
> @@ -18,6 +18,11 @@
> #include <linux/mv643xx_i2c.h>
> #include <linux/platform_device.h>
> #include <linux/io.h>
> +#include <linux/of.h>
> +#include <linux/of_irq.h>
> +#include <linux/of_i2c.h>
> +#include <linux/clk.h>
> +#include <linux/err.h>
>
> /* Register defines */
> #define MV64XXX_I2C_REG_SLAVE_ADDR 0x00
> @@ -98,6 +103,9 @@ struct mv64xxx_i2c_data {
> int rc;
> u32 freq_m;
> u32 freq_n;
> +#if defined(CONFIG_HAVE_CLK)
> + struct clk *clk;
> +#endif
> wait_queue_head_t waitq;
> spinlock_t lock;
> struct i2c_msg *msg;
> @@ -521,6 +529,83 @@ mv64xxx_i2c_unmap_regs(struct mv64xxx_i2c_data *drv_data)
> drv_data->reg_base_p = 0;
> }
>
> +#ifdef CONFIG_OF
> +static int __devinit
> +mv64xxx_calc_freq(const int tclk, const int n, const int m)
> +{
> + return tclk / (10 * (m + 1) * (2 << n));
> +}
> +
> +static bool __devinit
> +mv64xxx_find_baud_factors(const int req_freq, const int tclk, int *best_n,
> + int *best_m)
> +{
> + int freq, delta, best_delta = INT_MAX;
> + int m, n;
> +
> + for (n = 0; n <= 7; n++)
> + for (m = 0; m <= 15; m++) {
> + freq = mv64xxx_calc_freq(tclk, n, m);
> + delta = req_freq - freq;
> + if (delta >= 0 && delta < best_delta) {
> + *best_m = m;
> + *best_n = n;
> + best_delta = delta;
> + }
> + if (best_delta == 0)
> + return true;
> + }
> + if (best_delta == INT_MAX)
> + return false;
> + return true;
> +}
> +
> +static int __devinit
> +mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data,
> + struct device_node *np)
> +{
> + int bus_freq;
> + int tclk;
> + int rc = 0;
> +
> + /* CLK is mandatory when using DT to describe the i2c bus. We
> + * need to know tclk in order to calculate bus clock
> + * factors.
> + */
> +#if !defined(CONFIG_HAVE_CLK)
> + /* Have OF but no CLK */
> + rc = -ENODEV;
return -ENODEV?
> +#else
> + if (IS_ERR(drv_data->clk)) {
> + rc = -ENODEV;
> + goto out;
> + }
> + tclk = clk_get_rate(drv_data->clk);
> + of_property_read_u32(np, "clock-frequency", &bus_freq);
> + if (!mv64xxx_find_baud_factors(bus_freq, tclk,
> + &drv_data->freq_n, &drv_data->freq_m)) {
> + rc = -EINVAL;
> + goto out;
> + }
> + drv_data->irq = irq_of_parse_and_map(np, 0);
> +
> + /* Its not yet defined how timeouts will be specified in device tree.
> + * So hard code the value to 1 second.
> + */
> + drv_data->adapter.timeout = HZ;
> +out:
> + return rc;
> +#endif
> +}
> +#else /* CONFIG_OF */
> +static int __devinit
> +mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data,
> + struct device_node *np)
> +{
> + return -ENODEV;
> +}
> +#endif /* CONFIG_OF */
> +
> static int __devinit
> mv64xxx_i2c_probe(struct platform_device *pd)
> {
> @@ -528,7 +613,7 @@ mv64xxx_i2c_probe(struct platform_device *pd)
> struct mv64xxx_i2c_pdata *pdata = pd->dev.platform_data;
> int rc;
>
> - if ((pd->id != 0) || !pdata)
> + if ((!pdata && !pd->dev.of_node) || (pdata && (pd->id != 0)))
> return -ENODEV;
>
> drv_data = kzalloc(sizeof(struct mv64xxx_i2c_data), GFP_KERNEL);
> @@ -546,19 +631,36 @@ mv64xxx_i2c_probe(struct platform_device *pd)
> init_waitqueue_head(&drv_data->waitq);
> spin_lock_init(&drv_data->lock);
>
> - drv_data->freq_m = pdata->freq_m;
> - drv_data->freq_n = pdata->freq_n;
> - drv_data->irq = platform_get_irq(pd, 0);
> +#if defined(CONFIG_HAVE_CLK)
> + /* Not all platforms have a clk */
> + drv_data->clk = clk_get(&pd->dev, NULL);
> + if (!IS_ERR(drv_data->clk)) {
> + clk_prepare(drv_data->clk);
> + clk_enable(drv_data->clk);
> + }
> +#endif
> + if (pdata) {
> + drv_data->freq_m = pdata->freq_m;
> + drv_data->freq_n = pdata->freq_n;
> + drv_data->irq = platform_get_irq(pd, 0);
> + drv_data->adapter.timeout = msecs_to_jiffies(pdata->timeout);
> + }
> + if (pd->dev.of_node) {
else if?
> + rc = mv64xxx_of_config(drv_data, pd->dev.of_node);
> + if (rc)
> + goto exit_unmap_regs;
> + }
> if (drv_data->irq < 0) {
> rc = -ENXIO;
> goto exit_unmap_regs;
> }
> +
> drv_data->adapter.dev.parent = &pd->dev;
> drv_data->adapter.algo = &mv64xxx_i2c_algo;
> drv_data->adapter.owner = THIS_MODULE;
> drv_data->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
> - drv_data->adapter.timeout = msecs_to_jiffies(pdata->timeout);
> drv_data->adapter.nr = pd->id;
> + drv_data->adapter.dev.of_node = pd->dev.of_node;
> platform_set_drvdata(pd, drv_data);
> i2c_set_adapdata(&drv_data->adapter, drv_data);
>
> @@ -577,11 +679,20 @@ mv64xxx_i2c_probe(struct platform_device *pd)
> goto exit_free_irq;
> }
>
> + of_i2c_register_devices(&drv_data->adapter);
> +
> return 0;
>
> exit_free_irq:
> free_irq(drv_data->irq, drv_data);
> exit_unmap_regs:
> +#if defined(CONFIG_HAVE_CLK)
> + /* Not all platforms have a clk */
> + if (!IS_ERR(drv_data->clk)) {
> + clk_disable(drv_data->clk);
> + clk_unprepare(drv_data->clk);
> + }
> +#endif
> mv64xxx_i2c_unmap_regs(drv_data);
> exit_kfree:
> kfree(drv_data);
> @@ -597,17 +708,31 @@ mv64xxx_i2c_remove(struct platform_device *dev)
> rc = i2c_del_adapter(&drv_data->adapter);
> free_irq(drv_data->irq, drv_data);
> mv64xxx_i2c_unmap_regs(drv_data);
> +#if defined(CONFIG_HAVE_CLK)
> + /* Not all platforms have a clk */
> + if (!IS_ERR(drv_data->clk)) {
> + clk_disable(drv_data->clk);
> + clk_unprepare(drv_data->clk);
> + }
> +#endif
> kfree(drv_data);
>
> return rc;
> }
>
> +static const struct of_device_id mv64xxx_i2c_of_match_table[] __devinitdata
> = {
> + { .compatible = "marvell,mv64xxx-i2c", },
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, mv64xxx_i2c_of_match_table);
> +
> static struct platform_driver mv64xxx_i2c_driver = {
> .probe = mv64xxx_i2c_probe,
> .remove = __devexit_p(mv64xxx_i2c_remove),
> .driver = {
> .owner = THIS_MODULE,
> .name = MV64XXX_I2C_CTLR_NAME,
> + .of_match_table = of_match_ptr(mv64xxx_i2c_of_match_table),
> },
> };
Rest looks good to me and it should be safe to rebase now.
Thanks,
Wolfram
--
Pengutronix e.K. | Wolfram Sang |
Industrial Linux Solutions | http://www.pengutronix.de/ |
signature.asc
Description: Digital signature
