On 08/21/2012 04:29 PM, [email protected] : > From: Ludovic Desroches <[email protected]> > > Add twi nodes for atmel SOCs and remove i2c-gpio ones. > > Signed-off-by: Ludovic Desroches <[email protected]>
Yes, we will move to it once people test it a little bit... Acked-by: Nicolas Ferre <[email protected]> > --- > arch/arm/boot/dts/at91sam9260.dtsi | 23 ++++++------- > arch/arm/boot/dts/at91sam9263.dtsi | 23 ++++++------- > arch/arm/boot/dts/at91sam9g45.dtsi | 33 +++++++++++------- > arch/arm/boot/dts/at91sam9n12.dtsi | 33 +++++++++++------- > arch/arm/boot/dts/at91sam9x5.dtsi | 69 > +++++++++++++++++--------------------- > 5 files changed, 90 insertions(+), 91 deletions(-) > > diff --git a/arch/arm/boot/dts/at91sam9260.dtsi > b/arch/arm/boot/dts/at91sam9260.dtsi > index f449efc..0ab7a3c 100644 > --- a/arch/arm/boot/dts/at91sam9260.dtsi > +++ b/arch/arm/boot/dts/at91sam9260.dtsi > @@ -28,6 +28,7 @@ > gpio2 = &pioC; > tcb0 = &tcb0; > tcb1 = &tcb1; > + i2c0 = &i2c0; > }; > cpus { > cpu@0 { > @@ -198,6 +199,15 @@ > status = "disabled"; > }; > > + i2c0: i2c@fffac000 { > + compatible = "atmel,at91sam9260-i2c"; > + reg = <0xfffac000 0x100>; > + interrupts = <11 4>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > adc0: adc@fffe0000 { > compatible = "atmel,at91sam9260-adc"; > reg = <0xfffe0000 0x100>; > @@ -257,17 +267,4 @@ > status = "disabled"; > }; > }; > - > - i2c@0 { > - compatible = "i2c-gpio"; > - gpios = <&pioA 23 0 /* sda */ > - &pioA 24 0 /* scl */ > - >; > - i2c-gpio,sda-open-drain; > - i2c-gpio,scl-open-drain; > - i2c-gpio,delay-us = <2>; /* ~100 kHz */ > - #address-cells = <1>; > - #size-cells = <0>; > - status = "disabled"; > - }; > }; > diff --git a/arch/arm/boot/dts/at91sam9263.dtsi > b/arch/arm/boot/dts/at91sam9263.dtsi > index 0209913..efb86dd 100644 > --- a/arch/arm/boot/dts/at91sam9263.dtsi > +++ b/arch/arm/boot/dts/at91sam9263.dtsi > @@ -24,6 +24,7 @@ > gpio3 = &pioD; > gpio4 = &pioE; > tcb0 = &tcb0; > + i2c0 = &i2c0; > }; > cpus { > cpu@0 { > @@ -179,6 +180,15 @@ > interrupts = <24 4>; > status = "disabled"; > }; > + > + i2c0: i2c@fff88000 { > + compatible = "atmel,at91sam9260-i2c"; > + reg = <0xfff88000 0x100>; > + interrupts = <13 4>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > }; > > nand0: nand@40000000 { > @@ -204,17 +214,4 @@ > status = "disabled"; > }; > }; > - > - i2c@0 { > - compatible = "i2c-gpio"; > - gpios = <&pioB 4 0 /* sda */ > - &pioB 5 0 /* scl */ > - >; > - i2c-gpio,sda-open-drain; > - i2c-gpio,scl-open-drain; > - i2c-gpio,delay-us = <2>; /* ~100 kHz */ > - #address-cells = <1>; > - #size-cells = <0>; > - status = "disabled"; > - }; > }; > diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi > b/arch/arm/boot/dts/at91sam9g45.dtsi > index 7dbccaf..8dd3ff8 100644 > --- a/arch/arm/boot/dts/at91sam9g45.dtsi > +++ b/arch/arm/boot/dts/at91sam9g45.dtsi > @@ -29,6 +29,8 @@ > gpio4 = &pioE; > tcb0 = &tcb0; > tcb1 = &tcb1; > + i2c0 = &i2c0; > + i2c1 = &i2c1; > }; > cpus { > cpu@0 { > @@ -200,6 +202,24 @@ > status = "disabled"; > }; > > + i2c0: i2c@fff84000 { > + compatible = "atmel,at91sam9260-i2c"; > + reg = <0xfff84000 0x100>; > + interrupts = <12 4>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c1: i2c@fff88000 { > + compatible = "atmel,at91sam9260-i2c"; > + reg = <0xfff88000 0x100>; > + interrupts = <13 4>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > adc0: adc@fffb0000 { > compatible = "atmel,at91sam9260-adc"; > reg = <0xfffb0000 0x100>; > @@ -268,17 +288,4 @@ > status = "disabled"; > }; > }; > - > - i2c@0 { > - compatible = "i2c-gpio"; > - gpios = <&pioA 20 0 /* sda */ > - &pioA 21 0 /* scl */ > - >; > - i2c-gpio,sda-open-drain; > - i2c-gpio,scl-open-drain; > - i2c-gpio,delay-us = <5>; /* ~100 kHz */ > - #address-cells = <1>; > - #size-cells = <0>; > - status = "disabled"; > - }; > }; > diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi > b/arch/arm/boot/dts/at91sam9n12.dtsi > index cb84de7..8a1969d 100644 > --- a/arch/arm/boot/dts/at91sam9n12.dtsi > +++ b/arch/arm/boot/dts/at91sam9n12.dtsi > @@ -26,6 +26,8 @@ > gpio3 = &pioD; > tcb0 = &tcb0; > tcb1 = &tcb1; > + i2c0 = &i2c0; > + i2c1 = &i2c1; > }; > cpus { > cpu@0 { > @@ -178,6 +180,24 @@ > atmel,use-dma-tx; > status = "disabled"; > }; > + > + i2c0: i2c@f8010000 { > + compatible = "atmel,at91sam9260-i2c"; > + reg = <0xf8010000 0x100>; > + interrupts = <9 4>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c1: i2c@f8014000 { > + compatible = "atmel,at91sam9260-i2c"; > + reg = <0xf8014000 0x100>; > + interrupts = <10 4>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > }; > > nand0: nand@40000000 { > @@ -205,17 +225,4 @@ > status = "disabled"; > }; > }; > - > - i2c@0 { > - compatible = "i2c-gpio"; > - gpios = <&pioA 30 0 /* sda */ > - &pioA 31 0 /* scl */ > - >; > - i2c-gpio,sda-open-drain; > - i2c-gpio,scl-open-drain; > - i2c-gpio,delay-us = <2>; /* ~100 kHz */ > - #address-cells = <1>; > - #size-cells = <0>; > - status = "disabled"; > - }; > }; > diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi > b/arch/arm/boot/dts/at91sam9x5.dtsi > index 6b3ef43..ec56eaf 100644 > --- a/arch/arm/boot/dts/at91sam9x5.dtsi > +++ b/arch/arm/boot/dts/at91sam9x5.dtsi > @@ -27,6 +27,9 @@ > gpio3 = &pioD; > tcb0 = &tcb0; > tcb1 = &tcb1; > + i2c0 = &i2c0; > + i2c1 = &i2c1; > + i2c2 = &i2c2; > }; > cpus { > cpu@0 { > @@ -191,6 +194,33 @@ > status = "disabled"; > }; > > + i2c0: i2c@f8010000 { > + compatible = "atmel,at91sam9260-i2c"; > + reg = <0xf8010000 0x100>; > + interrupts = <9 4>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c1: i2c@f8014000 { > + compatible = "atmel,at91sam9260-i2c"; > + reg = <0xf8014000 0x100>; > + interrupts = <10 4>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c2: i2c@f8018000 { > + compatible = "atmel,at91sam9260-i2c"; > + reg = <0xf8018000 0x100>; > + interrupts = <11 4>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > adc0: adc@f804c000 { > compatible = "atmel,at91sam9260-adc"; > reg = <0xf804c000 0x100>; > @@ -259,43 +289,4 @@ > status = "disabled"; > }; > }; > - > - i2c@0 { > - compatible = "i2c-gpio"; > - gpios = <&pioA 30 0 /* sda */ > - &pioA 31 0 /* scl */ > - >; > - i2c-gpio,sda-open-drain; > - i2c-gpio,scl-open-drain; > - i2c-gpio,delay-us = <2>; /* ~100 kHz */ > - #address-cells = <1>; > - #size-cells = <0>; > - status = "disabled"; > - }; > - > - i2c@1 { > - compatible = "i2c-gpio"; > - gpios = <&pioC 0 0 /* sda */ > - &pioC 1 0 /* scl */ > - >; > - i2c-gpio,sda-open-drain; > - i2c-gpio,scl-open-drain; > - i2c-gpio,delay-us = <2>; /* ~100 kHz */ > - #address-cells = <1>; > - #size-cells = <0>; > - status = "disabled"; > - }; > - > - i2c@2 { > - compatible = "i2c-gpio"; > - gpios = <&pioB 4 0 /* sda */ > - &pioB 5 0 /* scl */ > - >; > - i2c-gpio,sda-open-drain; > - i2c-gpio,scl-open-drain; > - i2c-gpio,delay-us = <2>; /* ~100 kHz */ > - #address-cells = <1>; > - #size-cells = <0>; > - status = "disabled"; > - }; > }; > -- Nicolas Ferre -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
