[email protected] wrote on Friday, August 31, 2012 11:21 AM
> From: Ludovic Desroches <[email protected]>
>
> As indicated in the datasheet, TWD and TWCK must not be programmed as
> open-drain.
>
> Signed-off-by: Ludovic Desroches <[email protected]>
Acked-by: Nikolaus Voss <[email protected]>
> ---
> arch/arm/mach-at91/at91sam9261_devices.c | 18 ++++++++++--------
> 1 file changed, 10 insertions(+), 8 deletions(-)
>
> diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-
> at91/at91sam9261_devices.c
> index c94495d..405f603 100644
> --- a/arch/arm/mach-at91/at91sam9261_devices.c
> +++ b/arch/arm/mach-at91/at91sam9261_devices.c
> @@ -324,20 +324,22 @@ static struct platform_device
> at91sam9261_twi_device = {
>
> void __init at91_add_device_i2c(struct i2c_board_info *devices, int
> nr_devices)
> {
> - /* IP version is not the same on 9261 and g10 */
> + /*
> + * IP version is not the same on 9261 and g10 and only 9261 one
> + * requires to configure PIO as open-drain.
> + */
> if (cpu_is_at91sam9g10()) {
> at91sam9261_twi_device.name = "at91sam9g10_i2c";
> + at91_set_A_periph(AT91_PIN_PA7, 0); /* TWD
> */
> + at91_set_A_periph(AT91_PIN_PA8, 0); /*
> TWCK */
> } else {
> at91sam9261_twi_device.name = "at91sam9261_i2c";
> + at91_set_A_periph(AT91_PIN_PA7, 0); /* TWD
> */
> + at91_set_multi_drive(AT91_PIN_PA7, 1);
> + at91_set_A_periph(AT91_PIN_PA8, 0); /*
> TWCK */
> + at91_set_multi_drive(AT91_PIN_PA8, 1);
> }
>
> - /* pins used for TWI interface */
> - at91_set_A_periph(AT91_PIN_PA7, 0); /* TWD */
> - at91_set_multi_drive(AT91_PIN_PA7, 1);
> -
> - at91_set_A_periph(AT91_PIN_PA8, 0); /* TWCK */
> - at91_set_multi_drive(AT91_PIN_PA8, 1);
> -
> i2c_register_board_info(0, devices, nr_devices);
> platform_device_register(&at91sam9261_twi_device);
> }
> --
> 1.7.11.3
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
