On Friday 31 August 2012 04:32 PM, Florian Vaussard wrote: > When booting using a device tree, the adapter number is dynamically > assigned after the log message is sent. > This patch modifies the log message to get a correct adapter id. > > Applies on 3.6-rc3. Tested on OMAP3 (Gumstix Overo). > > Signed-off-by: Florian Vaussard <[email protected]> Looks good to me.
Acked-by: Shubhrajyoti D <[email protected]> > --- > drivers/i2c/busses/i2c-omap.c | 6 +++--- > 1 files changed, 3 insertions(+), 3 deletions(-) > > diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c > index 5d19a49..136b4fe 100644 > --- a/drivers/i2c/busses/i2c-omap.c > +++ b/drivers/i2c/busses/i2c-omap.c > @@ -1064,9 +1064,6 @@ omap_i2c_probe(struct platform_device *pdev) > goto err_unuse_clocks; > } > > - dev_info(dev->dev, "bus %d rev%d.%d.%d at %d kHz\n", pdev->id, > - dev->dtrev, dev->rev >> 4, dev->rev & 0xf, dev->speed); > - > adap = &dev->adapter; > i2c_set_adapdata(adap, dev); > adap->owner = THIS_MODULE; > @@ -1084,6 +1081,9 @@ omap_i2c_probe(struct platform_device *pdev) > goto err_free_irq; > } > > + dev_info(dev->dev, "bus %d rev%d.%d.%d at %d kHz\n", adap->nr, > + dev->dtrev, dev->rev >> 4, dev->rev & 0xf, dev->speed); > + > of_i2c_register_devices(adap); > > pm_runtime_put(dev->dev); -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
