Dear Fabio Estevam, > From: Fabio Estevam <[email protected]> > > With the recent DMA support addition to the i2c-mxs driver, it is now > possible to also run it on mx23, so update the Kconfig entry accordingly. > > Signed-off-by: Fabio Estevam <[email protected]> > --- > drivers/i2c/busses/Kconfig | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig > index e9df461..34f48f3 100644 > --- a/drivers/i2c/busses/Kconfig > +++ b/drivers/i2c/busses/Kconfig > @@ -482,12 +482,12 @@ config I2C_MV64XXX > will be called i2c-mv64xxx. > > config I2C_MXS > - tristate "Freescale i.MX28 I2C interface" > - depends on SOC_IMX28 > + tristate "Freescale MXS I2C interface" > + depends on ARCH_MXS > select STMP_DEVICE > help > Say Y here if you want to use the I2C bus controller on > - the Freescale i.MX28 processors. > + the Freescale MXS processors. > > This driver can also be built as a module. If so, the module > will be called i2c-mxs.
Won't i.MX23/i.MX28 instead of MXS be less confusing? Either way: Acked-by: Marek Vasut <[email protected]> Best regards, Marek Vasut -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
