The I2C driver makes a gpio_request during initialization. This request happens again on resume and fails due to the earlier successful request. Re-factor the code to only initialize the gpios during probe.
Errors on resume without this: [ 16.020000] s3c-i2c s3c2440-i2c.0: gpio [42] request failed [ 16.020000] s3c-i2c s3c2440-i2c.1: gpio [44] request failed [ 16.020000] s3c-i2c s3c2440-i2c.2: gpio [6] request failed Signed-off-by: Abhilash Kesavan <[email protected]> --- Changes from v1: Refactor code to initialize gpios only during probe Changes from v2: Split an unrelated bug fix Removed the new function added in v1 drivers/i2c/busses/i2c-s3c2410.c | 16 +++++++++------- 1 files changed, 9 insertions(+), 7 deletions(-) diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index 081e261..dea4cb2 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -907,13 +907,6 @@ static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c) pdata = i2c->pdata; - /* inititalise the gpio */ - - if (pdata->cfg_gpio) - pdata->cfg_gpio(to_platform_device(i2c->dev)); - else if (IS_ERR(i2c->pctrl) && s3c24xx_i2c_parse_dt_gpio(i2c)) - return -EINVAL; - /* write slave address */ writeb(pdata->slave_addr, i2c->regs + S3C2410_IICADD); @@ -1054,6 +1047,15 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev) i2c->pctrl = devm_pinctrl_get_select_default(i2c->dev); + /* inititalise the i2c gpio lines */ + + if (i2c->pdata->cfg_gpio) { + i2c->pdata->cfg_gpio(to_platform_device(i2c->dev)); + } else if (IS_ERR(i2c->pctrl) && s3c24xx_i2c_parse_dt_gpio(i2c)) { + ret = -EINVAL; + goto err_clk; + } + /* initialise the i2c controller */ ret = s3c24xx_i2c_init(i2c); -- 1.6.6.1 -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
