On 25 November 2012 02:33, Wolfram Sang <[email protected]> wrote:
>> diff --git a/drivers/i2c/busses/i2c-designware-core.c
>> b/drivers/i2c/busses/i2c-designware-core.c
>> @@ -538,7 +538,12 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg
>> msgs[], int num)
>> ret = wait_for_completion_interruptible_timeout(&dev->cmd_complete,
>> HZ);
>> if (ret == 0) {
>> dev_err(dev->dev, "controller timed out\n");
>> - i2c_dw_init(dev);
>> + if (adap->bus_recovery_info &&
>> + adap->bus_recovery_info->recover_bus) {
>> + dev_dbg(dev->dev, "try i2c bus recovery\n");
>> + adap->bus_recovery_info->recover_bus(adap);
>> + }
>> +
>
> This should be in the core?
Because wait_for_completion() would fail in controllers, so i kept this
code here. How will we come to know about xfer failure in core?
Though i realize that check for adap->bus_recovery_info->recover_bus()
is just not required.
>> diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c
>> b/drivers/i2c/busses/i2c-designware-platdrv.c
>> + /* Bus recovery support */
>> + pdata = dev_get_platdata(&pdev->dev);
>> + if (pdata) {
>> + recovery_info = kzalloc(sizeof(*recovery_info), GFP_KERNEL);
>> + if (!recovery_info) {
>> + adap->bus_recovery_info = NULL;
>> + dev_err(&pdev->dev,
>> + "failure to allocate memory for bus
>> recovery\n");
>> + goto skip_recovery;
>> + }
>> +
>> + recovery_info->is_gpio_recovery = true;
>> + recovery_info->get_gpio = pdata->get_gpio;
>> + recovery_info->put_gpio = pdata->put_gpio;
>> + recovery_info->scl_gpio = pdata->scl_gpio;
>> + recovery_info->scl_gpio_flags = pdata->scl_gpio_flags;
>> + recovery_info->clock_rate_khz = clk_get_rate(dev->clk) / 1000;
>
> It is probably easier to define the whole bri structure in the platform
> and simply pass it on here? Hmm, now devicetree also comes to my mind.
> Will think about that a little, too, but main implementation should be
> left for someone needing that.
Ok. I didn't went for DT as recovery_info also has some routines, for which
we need special implementation for platforms.
--
viresh
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
