Signed-off-by: Joachim Eastwood <[email protected]>
---
Hi,
AT91RM9200 is gaining DT support now so let's add an id to the i2c driver.
Tested on custom RM9200 board. Since the driver doesn't support pinctrl
muxing yet I had to add pinctrl hogs for the i2c pins in my dts for it
to work.
regards
Joachim Eastwood
drivers/i2c/busses/i2c-at91.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
index b4575ee..c504aa8 100644
--- a/drivers/i2c/busses/i2c-at91.c
+++ b/drivers/i2c/busses/i2c-at91.c
@@ -584,6 +584,9 @@ static const struct platform_device_id at91_twi_devtypes[]
= {
#if defined(CONFIG_OF)
static const struct of_device_id atmel_twi_dt_ids[] = {
{
+ .compatible = "atmel,at91rm9200-i2c",
+ .data = &at91rm9200_config,
+ } , {
.compatible = "atmel,at91sam9260-i2c",
.data = &at91sam9260_config,
} , {
--
1.8.0
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
