>-----Original Message----- >From: Sascha Hauer [mailto:[email protected]] >Sent: Thursday, June 20, 2013 4:04 PM >To: Lu Jingchang-B35083 >Cc: [email protected]; [email protected]; Estevam Fabio-R49496; linux- >[email protected]; [email protected]; Jin Zhengxiong- >R64188; Li Xiaochun-B41219 >Subject: Re: [PATCH v2 2/2] i2c: imx: Add Vybrid VF610 I2C controller >support > >On Tue, Jun 18, 2013 at 04:48:47PM +0800, Jingchang Lu wrote: >> +static u16 imx_i2c_clk_div[50][2] = { >> { 22, 0x20 }, { 24, 0x21 }, { 26, 0x22 }, { 28, 0x23 }, >> { 30, 0x00 }, { 32, 0x24 }, { 36, 0x25 }, { 40, 0x26 }, >> { 42, 0x03 }, { 44, 0x27 }, { 48, 0x28 }, { 52, 0x05 }, >> @@ -112,11 +107,67 @@ static u16 __initdata i2c_clk_div[50][2] = { >> { 3072, 0x1E }, { 3840, 0x1F } >> }; >> >> +/* Vybrid VF610 clock divider, register value pairs */ >> +static u16 vf610_i2c_clk_div[60][2] = { >> + { 20, 0x00 }, { 22, 0x01 }, { 24, 0x02 }, { 26, 0x03 }, >> + { 28, 0x04 }, { 30, 0x05 }, { 32, 0x09 }, { 34, 0x06 }, >> + { 36, 0x0A }, { 40, 0x07 }, { 44, 0x0C }, { 48, 0x0D }, >> + { 52, 0x43 }, { 56, 0x0E }, { 60, 0x45 }, { 64, 0x12 }, >> + { 68, 0x0F }, { 72, 0x13 }, { 80, 0x14 }, { 88, 0x15 }, >> + { 96, 0x19 }, { 104, 0x16 }, { 112, 0x1A }, { 128, 0x17 }, >> + { 136, 0x4F }, { 144, 0x1C }, { 160, 0x1D }, { 176, 0x55 }, >> + { 192, 0x1E }, { 208, 0x56 }, { 224, 0x22 }, { 228, 0x24 }, >> + { 240, 0x1F }, { 256, 0x23 }, { 288, 0x5C }, { 320, 0x25 }, >> + { 384, 0x26 }, { 448, 0x2A }, { 480, 0x27 }, { 512, 0x2B }, >> + { 576, 0x2C }, { 640, 0x2D }, { 768, 0x31 }, { 896, 0x32 }, >> + { 960, 0x2F }, { 1024, 0x33 }, { 1152, 0x34 }, { 1280, 0x35 }, >> + { 1536, 0x36 }, { 1792, 0x3A }, { 1920, 0x37 }, { 2048, 0x3B }, >> + { 2304, 0x3C }, { 2560, 0x3D }, { 3072, 0x3E }, { 3584, 0x7A }, >> + { 3840, 0x3F }, { 4096, 0x7B }, { 5120, 0x7D }, { 6144, 0x7E }, >> +}; > >... > >> +static struct imx_i2c_hwdata imx_i2c_hwdata = { >> + .addr_reg = 0x00, >> + .freq_reg = 0x04, >> + .ctrl_reg = 0x08, >> + .status_reg = 0x0c, >> + .data_reg = 0x10, >> + .clk_div = imx_i2c_clk_div, >> + .ndivs = ARRAY_SIZE(imx_i2c_clk_div), >> + .i2sr_clr_opcode = I2SR_CLR_OPCODE_W0C, >> + .i2cr_ien_opcode = I2CR_IEN_OPCODE_1, >> + >> +}; >> + >> +static struct imx_i2c_hwdata vf610_i2c_hwdata = { >> + .addr_reg = 0x00, >> + .freq_reg = 0x01, >> + .ctrl_reg = 0x02, >> + .status_reg = 0x03, >> + .data_reg = 0x04, >> + .clk_div = vf610_i2c_clk_div, >> + .ndivs = ARRAY_SIZE(vf610_i2c_clk_div), >> + .i2sr_clr_opcode = I2SR_CLR_OPCODE_W1C, >> + .i2cr_ien_opcode = I2CR_IEN_OPCODE_0, >> + >> +}; > >Wow. The i2c unit remained unchanged since the i.MX21 days. Shuffling >some registers or divider values was long overdue... > [Lu Jingchang-B35083] Could I understand that you are OK for the patch? If yes, Could you please ACKed it? Thanks.
Best Regards, Jingchang -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
