From: Fabio Estevam <[email protected]> stmp_reset_block() may fail, so let's check its return value and propagate it in the case of error.
Signed-off-by: Fabio Estevam <[email protected]> --- drivers/i2c/busses/i2c-mxs.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c index df8ff5a..1891ae7 100644 --- a/drivers/i2c/busses/i2c-mxs.c +++ b/drivers/i2c/busses/i2c-mxs.c @@ -123,9 +123,11 @@ struct mxs_i2c_dev { bool dma_read; }; -static void mxs_i2c_reset(struct mxs_i2c_dev *i2c) +static int mxs_i2c_reset(struct mxs_i2c_dev *i2c) { - stmp_reset_block(i2c->regs); + int ret = stmp_reset_block(i2c->regs); + if (ret) + return ret; /* * Configure timing for the I2C block. The I2C TIMING2 register has to @@ -139,6 +141,8 @@ static void mxs_i2c_reset(struct mxs_i2c_dev *i2c) writel(0x00300030, i2c->regs + MXS_I2C_TIMING2); writel(MXS_I2C_IRQ_MASK << 8, i2c->regs + MXS_I2C_CTRL1_SET); + + return 0; } static void mxs_i2c_dma_finish(struct mxs_i2c_dev *i2c) @@ -683,7 +687,9 @@ static int mxs_i2c_probe(struct platform_device *pdev) platform_set_drvdata(pdev, i2c); /* Do reset to enforce correct startup after pinmuxing */ - mxs_i2c_reset(i2c); + err = mxs_i2c_reset(i2c); + if (err) + return err; adap = &i2c->adapter; strlcpy(adap->name, "MXS I2C adapter", sizeof(adap->name)); -- 1.8.1.2 -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
