Hi Ezequiel, > From: James Hogan <[email protected]> > > Introduce a devicetree binding for Imagination Technologies > I2C SCB controller. > > Signed-off-by: James Hogan <[email protected]>
This should have your S-o-B as well. > diff --git a/Documentation/devicetree/bindings/i2c/i2c-img-scb.txt > b/Documentation/devicetree/bindings/i2c/i2c-img-scb.txt > @@ -0,0 +1,14 @@ > +IMG Serial Control Bus (SCB) I2C Controller > + > +Required Properties: > +- compatible: "img,scb-i2c" Is there no difference between the controller present on TZ1090 and Pistachio? > +- reg: Physical base address and length of controller registers > +- interrupts: Interrupt number used by the controller > +- clocks : Clock specifier to the SCB clock node On Pistachio there are two clocks per controller, the I2C operating clock and I2C "system" clock (which I assume is the system interface gate clock). There should also be a "clock-names" property with an entry for each clock. > +- clock-frequency: The I2C bus frequency in Hz > +- bus-delay : Bus delay in ms Probably should list #address-cells and #size-cells here as well. > +Optional properties: > +- linux,i2c-index: Can be used to override the I2C bus number. This is useful > + when some of the I2C adapters are used by other non-Linux cores so would > get > + numbered incorrectly by default. I don't think this is necessary. Aliases can be used to set the adapter number instead. Also, it's generally good to include an example node. -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
