Hi Wolfram,
On Tue, 11 Nov 2014 11:58:54 +0100, Wolfram Sang wrote:
> On Mon, Nov 10, 2014 at 10:31:39PM +0100, Jean Delvare wrote:
> > There is a control bit in the PCI configuration space which disables
> > interrupts. If this bit is set, the driver should not try to make use
> > of interrupts, it won't receive any.
> >
> > Signed-off-by: Jean Delvare <[email protected]>
> > Cc: Wolfram Sang <[email protected]>
> > ---
> > drivers/i2c/busses/i2c-i801.c | 21 +++++++++++++++++++++
> > 1 file changed, 21 insertions(+)
> >
> > --- linux-3.18-rc4.orig/drivers/i2c/busses/i2c-i801.c 2014-11-10
> > 22:29:44.416991298 +0100
> > +++ linux-3.18-rc4/drivers/i2c/busses/i2c-i801.c 2014-11-10
> > 22:29:46.915045662 +0100
> > @@ -110,12 +110,16 @@
> >
> > /* PCI Address Constants */
> > #define SMBBAR 4
> > +#define SMBPCICTL 0x004
> > #define SMBPCISTS 0x006
> > #define SMBHSTCFG 0x040
> >
> > /* Host status bits for SMBPCISTS */
> > #define SMBPCISTS_INTS 0x08
> >
> > +/* Control bits for SMBPCICTL */
> > +#define SMBPCICTL_INTDIS 0x0400
> > +
> > /* Host configuration bits for SMBHSTCFG */
> > #define SMBHSTCFG_HST_EN 1
> > #define SMBHSTCFG_SMB_SMI_EN 2
> > @@ -1235,6 +1239,23 @@ static int i801_probe(struct pci_dev *de
> > priv->adapter.timeout = HZ / 5;
> >
> > if (priv->features & FEATURE_IRQ) {
> > + u16 pcictl, pcists;
> > +
> > + /* Complain if an interrupt is already pending */
> > + pci_read_config_word(priv->pci_dev, SMBPCISTS, &pcists);
> > + if (pcists & SMBPCISTS_INTS)
> > + dev_warn(&dev->dev, "An interrupt is pending!\n");
>
> You think it is better to not clear it?
I admit I did not think about it. As I am trying to better understand
the few mysterious failure cases that have been reported to me, I just
wanted to log everything out of the ordinary. I have no idea what's
considered the right thing to do in such a situation. Do you believe
that clearing the interrupt is the appropriate action in that case?
> > +
> > + /* Check if interrupts have been disabled */
> > + pci_read_config_word(priv->pci_dev, SMBPCICTL, &pcictl);
> > + if (pcictl & SMBPCICTL_INTDIS) {
> > + dev_warn(&dev->dev,
> > + "Interrupts are disabled, will use polling\n");
>
> I'd say it is more info than warning?
Correct, I'll change it.
> > + priv->features &= ~FEATURE_IRQ;
> > + }
> > + }
> > +
> > + if (priv->features & FEATURE_IRQ) {
> > init_waitqueue_head(&priv->waitq);
> >
> > err = request_irq(dev->irq, i801_isr, IRQF_SHARED,
Thanks again,
--
Jean Delvare
SUSE L3 Support
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
