On 01/22/2015 04:44 PM, Andy Shevchenko wrote:
The clk_khz field makes sense only if SS counters are not provided. Since we
provide them for Haswell and Baytrail explicitly we can omit the clk_khz
parameter.
Signed-off-by: Andy Shevchenko <[email protected]>
---
drivers/i2c/busses/i2c-designware-pcidrv.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c
b/drivers/i2c/busses/i2c-designware-pcidrv.c
index 2bbd2a7..506cbe8 100644
--- a/drivers/i2c/busses/i2c-designware-pcidrv.c
+++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
@@ -112,7 +112,6 @@ static struct dw_pci_controller dw_pci_controllers[] = {
.bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
.tx_fifo_depth = 32,
.rx_fifo_depth = 32,
- .clk_khz = 100000,
.functionality = I2C_FUNC_10BIT_ADDR,
.scl_sda_cfg = &byt_config,
},
@@ -121,7 +120,6 @@ static struct dw_pci_controller dw_pci_controllers[] = {
.bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
.tx_fifo_depth = 32,
.rx_fifo_depth = 32,
- .clk_khz = 100000,
.functionality = I2C_FUNC_10BIT_ADDR,
.scl_sda_cfg = &hsw_config,
},
Yes, there are no other use for the clock rate than calculate these SS
counters in drivers/i2c/busses/i2c-designware-core.c, and which will get
overwritten by provided values.
Reviewed-by: Jarkko Nikula <[email protected]>
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
