return type of wait_for_completion_timeout is unsigned long not int, rather than introducing a new variable the wait_for_completion_timeout is moved into the if condition as the return value is only used to detect timeout.
Signed-off-by: Nicholas Mc Guire <[email protected]> --- v2: Aside from the newly added variable having the wrong type (...) the preferred solution is to simply wrap wait_for_completion_timeout into the condition as the remaining jiffies is actually not used - suggested be Jarkko Nikula <[email protected]. Patch was compile tested with x86_64_defconfig + CONFIG_X86_AMD_PLATFORM_DEVICE=y, CONFIG_I2C_DESIGNWARE_PLATFORM=m (implies CONFIG_I2C_DESIGNWARE_CORE=y) Patch is against 3.19.0-rc7 (localversion-next is -next-20150209) drivers/i2c/busses/i2c-designware-core.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c index 6e25c01..6f19a33 100644 --- a/drivers/i2c/busses/i2c-designware-core.c +++ b/drivers/i2c/busses/i2c-designware-core.c @@ -656,8 +656,7 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) i2c_dw_xfer_init(dev); /* wait for tx to complete */ - ret = wait_for_completion_timeout(&dev->cmd_complete, HZ); - if (ret == 0) { + if (!wait_for_completion_timeout(&dev->cmd_complete, HZ)) { dev_err(dev->dev, "controller timed out\n"); /* i2c_dw_init implicitly disables the adapter */ i2c_dw_init(dev); -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
